1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

8ft mm2 to ezv question

Discussion in 'Fisher Engineering Discussion' started by Hegartydirtwork, Mar 16, 2013.

  1. Hegartydirtwork

    Hegartydirtwork Senior Member
    Messages: 118

    If I change my plow from a 8ft mm2 to an ezv what needs to change on the truck side other than the controller? I have a three wire setup now
  2. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    Controller and control wire I believe if its a 3 plug V
  3. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,267

    you are correct, if it is a 3 plug ez v

    controller and control harness
  4. 07PSDCREW

    07PSDCREW Senior Member
    Messages: 873

    One of the three outside plugs will have 7 pins instead of three. But save your straight blade controller and buy the adapter, fisher part# 21792k. Then you can run a straight or a vee...no problems.