1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

810 Motor Cover

Discussion in 'Blizzard Plows Discussion' started by Ice Scream, Feb 18, 2006.

  1. Ice Scream

    Ice Scream Member
    Messages: 82

    My cover will not stay tight, any solutions? I use pliers to tighten it. The ice builds up between the truck and the cover and I have poked a hole through the cover from the adj valve and broke some wires. Any solutions? Thanks
  2. DaySpring Services

    DaySpring Services PlowSite.com Addict
    Messages: 1,065

    use some loc-tite on the threads. That should do it.
  3. SnowGuy73

    SnowGuy73 PlowSite Fanatic
    Messages: 24,870

    I have the same problem with mine, not much you can do, the whole reason for that design is to have easy access to the pump and motor. I'm going to have real good access to it when it is laying on the side of the road somewhere because the damn wingnut won't stay tight. :realmad: