1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

7550 Error not working PLEASE HELP!

Discussion in 'SnowEx Products' started by nliput, Oct 26, 2011.

  1. nliput

    nliput Member
    Messages: 45

    I bought a brand new 7550 less than a year agao. I hooked it all up today because we have a storm coming through. The auger would run and the vibrator but not the sander. Now the sander screen beeps at me 99 10 99 10. I have no control of the sander or auger at this time but the vibrator works just fine. Unpluged everything many times cleaned connectors and used dielectric grease on all connectors. Please help!
  2. SnowEx Products

    SnowEx Products Sponsor
    Messages: 118

    I believe you recently spoke with a customer service representative who suspected there was a short in your harness or a faulty control board. If you run into problems after visiting your servicing dealer, please feel free to call back to discuss the problem further. I hope you get up and running soon!