1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

575 spreader harness to short

Discussion in 'SnowEx Products' started by Afaust1570, Oct 28, 2011.

  1. Afaust1570

    Afaust1570 Junior Member
    from Indiana
    Messages: 2

    Just set up a new Mini pro spreader and the harness from the main to the control
    Box is about a foot to short. Do they make a plug in extender or do I have to splice the hard wire
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    What kind of truck - cab/bed length.
  3. Afaust1570

    Afaust1570 Junior Member
    from Indiana
    Messages: 2

    01 dodge ext. cab long bed
  4. SnowEx Products

    SnowEx Products Sponsor
    Messages: 118

    The harness should be long enough for your setup. You may try adjusting the harness at the junction where it goes into the cab. At this junction, there is a plastic piece that locks the wire into place. The plastic piece can be loosened so you can pull more wire through. If this doesn't work, perhaps you can give us a call at 1-800-SALTERS to discuss the issue further. Thanks for being a SnowEx customer!
  5. Wayne Volz

    Wayne Volz Senior Member
    Messages: 694

    wiring harness

    Don't cut, splice or otherwise mess with the wiring harness. You need to redirect your route to the control box.

    Call SnowEx for questions 1-800-salters. You will like the spreader.