1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2011 GMC switch mounting

Discussion in 'Chevy Trucks' started by mitchp, Feb 20, 2014.

  1. mitchp

    mitchp Member
    Messages: 33

    Im thinking about adding a set of driving lights to the front of my GMC but Im not really into cutting a hole in my dash to mount the switch. Are there any factory plates made that would fill in the small compartment to the right of the heater controls ? Maybe for a plow light switch or airbag shut off ?
  2. hammerstein

    hammerstein Senior Member
    Messages: 318

  3. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    Or if you do have the fogs, you could just wire the driving lights into the factory fogs.
  4. mitchp

    mitchp Member
    Messages: 33

    I do have the factory fog lights and I thought about tapping into the line but the downside to that is the fogs go off when you switch on the high beams.