2011-16 FORD Super Duty Dual/Second Battery Box/Tray kits for gas trucks

Discussion in 'Used Plowing and Truck Equipment Forum' started by 2011F250Lariat, Nov 15, 2016.

  1. 2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    We are the only ones to have this, stainless steel or steel version, both powder coated black to look like OEM under the hood, right next to the factory battery location for super short wiring, we are on our 4th generation of this kit, with more installation components for a cleaner install, and the tray is re-enforced for heavy duty use, such as plowing.

    COMPLETE DUAL BATTERY SETUP !!! we are the only ones to have this. In stock ready to ship.

    BRAND NEW CUSTOM MANUFACTURED IN THE U.S.A. SECOND BATTERY HOLDER BOX/BRACKET, CABLES, HARDWARE, INSTRUCTIONS, ETC.

    Mounts under the hood, in the engine compartment, NOT on frame or elsewhere, very short wiring, and any 65 group size battery will fit this box including factory oem motorcraft.

    (We offer two versions, an upgraded 304 16ga. STAINLESS STEEL KIT WITH 2 GAUGE WIRING, or a 14ga steel kit with 4 gauge wiring, all other components are the same, ALL KITS ARE POWDER COATED black!)

    FITS: 2011, 2012, 2013, 2014, 2015 & 2016 super-duty trucks (f-250, f-350, f-450) with the 6.2 liter v8 or 6.8 liter v10 gasoline engine. Product is patent pending.

    ITEMS INCLUDED:

    1. Custom manufactured and welded heavy duty 16 gauge 304ss battery box, or 14ga. steel, powder coated textured black to match under the hood and protect from rust. It matches the black under the hood perfectly for a professional and factory look! Now DOUBLE reinforced. THIS IS THE 4TH GEN KIT JUST CAME OFF THE ASSEMBLY LINE 2016 revision. Has designated and adjustable size mounting spot for plow solenoid or isolator.

    2. Rubber battery mat for under the battery, separates metal from battery, and provides cushioning, protects box in case of battery acid leak.

    3. Factory oem battery wrap, separates metal from battery, provides cushioning, and fills space between battery and battery box, protects box in case of battery acid leak.

    4. Positive battery cable, 2 gauge (or 4 ga.), insulated, with proper connectors at each end already factory mounted.

    5. Negative battery cable, 2 gauge (or 4 ga.), insulated, with proper connectors at each end already factory mounted.

    6. Battery cable plastic protective sheathing, color coded.

    7. Appropriate SS mounting bolts, lock washers, washers, rubber grommets, and optional self tapping ss screws.

    8. Red and black rubber booties for the positive and negative battery terminals.

    9. OEM Factory Ford Battery Clamp.

    10. Detailed instructions with pictures.

    11. Zip ties and rubber insulator for factory power cable underneath battery box.

    Easy to install, anyone can do it.

    FITS: '11, '12, '13 14' 15' and 16' SUPERDUTY (super-duty) FORD TRUCKS (f-250, f-350, f-450) with 6.2L or 6.8L GAS (gasser) engine. No drilling required. Just need a 10MM socket and ratchet wrench to install. PLUG & PLAY KIT !!! We designed this kit to help with power supply issues especially those that are installing and running additional equipment, even though most of us not only use the truck as is but most install additional equipment such as plows and salt spreaders among others, and the current draw is more then the stock single 650cca battery can handle. I personally have this kit installed and love it, gives me more confidence in my work truck and piece of mind. Some of our customers include fire departments, ambulance companies, forestry trucks, village and city work vehicles, Ford dealerships, custom equipment installers, and more! Everyone loves it.

    Also we do currently manufacture stainless steel salt spreader bearings (an awesome upgrade to the cast iron steel ones that rust quickly), they are listed in our other listings, for those of you in the snow removal business, thanks.

    If you would like to see more pics please visit my eBay page, item 122187065869 or item 122209877855, if you like what you see/read, you can purchase one directly using a paypal payment, and I can offer you a 10% discount if you pm me on here with your paypal email address so I can send you an invoice directly instead of going through eBay, if you are more comfortable just clicking the buy it now on eBay that's fine too, any q's just ask, thanks.

    I am a site sponsor and have ads on here that you can click on as well.
    Eric
    Arico Enterprises Inc.

    s-l1600-8.jpg

    plowsite button.jpg
     
  2. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    Some more pics of the installed kit.

    battery tray.jpg

    IMG_1982.jpg
     
  3. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    We have been using the ford oem battery clamp for years now, like in the first pic, the second was my original prototype, i just wanted to show you guys a zoomed out pic showing how the two batteries sit right next to each other and how short the cable runs are.
     
  4. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    Now is a good time to get these, get ready for the season!
     
  5. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    Guys last minute Christmas Special 20% off till the end of the month !!! Paypal invoice only.
     
  6. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    End of season pricing on the kits, pm me if interested and I will give you a really good deal!
     
  7. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 30,560

    Do you have one for RAM 6.4?

    Doing some investigating, doesn't look like it's very simple. Intake is in the way on the passenger side.
     
    Last edited: Mar 2, 2017
  8. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    i do not have one for dodge trucks, sorry. the key is having the room there under the hood to do it, which is rare. that how we can make this happen in the 6.2l fords.
     
  9. cj7plowing

    cj7plowing Senior Member
    Messages: 420

    have one in my 2011 gas truck it was a 1 hour install nice an easy.
     
  10. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    Off season pricing is in effect for these, anyone interested please pm me, now's a great time to get the best deal on these !
     
  11. DaBomb6988

    DaBomb6988 Member
    Messages: 70

    Do you make a kit for GM trucks?
     
  12. Cp2016

    Cp2016 Junior Member
    Messages: 1

    New to this site. How do I order this?
     
  13. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    PM me for the site discount, I already PMed you so just check your messages, alternatively they are ALWAYS available on eBay.
     
  14. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    and so are the new 2017-up kits as well !!!
     
  15. sdspeeder

    sdspeeder Junior Member
    Messages: 1

    hello,
    I have a 2017 ford f550 with a 6.8 v10. will the 2017 kit fit in this vehicle? Lights shut down when plowing and want to add a second battery to solve issue
     
  16. rvermeer

    rvermeer Junior Member
    Messages: 1

    Do you still have these available?
     
  17. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152

    sure do.
     
  18. ponyboy

    ponyboy PlowSite.com Addict
    Messages: 1,335

    What’s the price on gas 6.2 ford I might do 5 if price isn’t crazy
     
  19. OP
    OP
    2011F250Lariat

    2011F250Lariat Sponsor
    Messages: 152