1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2010 F250 2B wiring

Discussion in 'Fisher Engineering Discussion' started by buddymanzpop, Mar 4, 2012.

  1. buddymanzpop

    buddymanzpop Senior Member
    Messages: 603

    Why does Fisher Ematch only come up with a 3 port module set up for a 2010 F250 (gas) with 2B headlamps? Is it a room constrait issue? We've got an older 2B four port white label set up here that was taken out of another truck, can't figure any reason why it won't work.????
  2. nealybird

    nealybird Senior Member
    Messages: 750

    no, there is no reason that the 4-port won't work. and the white label would be the correct one. If you don't have the 2B harnesses that plug into the 3 & 4 ports, they would be part # 26353 and 26356 (Fisher and Western use the same part numbers). If you already have those, then you should be all good.

    Neal Redding, parts mgr, Truck Equipment Inc, Des Moines IA