1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

2 plug MM solinoid clicking no movement.

Discussion in 'Fisher Engineering Discussion' started by tuna, Aug 11, 2012.

  1. tuna

    tuna Senior Member
    Messages: 488

    Truck is a 96 Dodge 2500 ,I put the plow on a few day ago to move it it went up no problem I angled it back and forth a few times when I put it down it stopped working no up, down ,or angle.Relay is clicking but the motor is not spinning.I tried playing with the plugs ,put a new relay on the fenderwell still no go.
  2. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,525

    If it clicks its probally working. Try tapping the motor with a hammer. Brushes are probally stuck or it just plain needs a motor.
  3. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Are you getting voltage to the motor when you lift or angle?
  4. joedafs

    joedafs Member
    from Toronto
    Messages: 50

    check your ground cable on the truck ide
  5. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,391

    Ck pwr and gnd at motor while operating controller