1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1998 1500 Upfit

Discussion in 'Ram Trucks' started by rjk512, Dec 7, 2015.

  1. rjk512

    rjk512 Member
    Messages: 43

    Helping a friend upfit a 1998 Ram 1500 with a plow. We're leaning towards a MM1 setup.

    We have found plenty of blades and are trying to figure out which one would be best (they're all MM1's or MM2's) based on price/condition and what not.

    I just want someone to verify that besides the blade, this is what we need to do to the upfit:

    -Blade, headgear, pump, and all plow-side wiring
    -Push plates
    -2-plug harness (vehicle side)
    -Isolation module

    Does anyone have any advice as far as the vehicle side wiring goes? Where to get the appropriate harnesses, etc...

    Thanks in advance...
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 12,174

    2 plug harness.... Well that depends on what plow. Older (more then 2years) are 3 plug unless it's a Vee or XLS, then its fleet flex.

    See its a1500 Ram, guessing straight blade also.
  3. rjk512

    rjk512 Member
    Messages: 43

    I believe the one we are looking at is a 2 plug... And yes, straight blade...
  4. rjk512

    rjk512 Member
    Messages: 43

    Actually, I might have to double check on that.