1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

1984 Chevy K-20 light wiring

Discussion in 'Truck & Equipment Repair' started by Kevin O'Brien, Mar 7, 2009.

  1. Kevin O'Brien

    Kevin O'Brien Junior Member
    Messages: 2

    Having some issues. Bought a truck with plow set up for the driveway, but the lights don't work properly. I'm having a heck of a time getting all of the light modes to work. I have been able to get different combinations hi/lo truck and plow lights, just not all at the same time. 6 wires red, white, green, blue, tan and pink. White red green on one side will allow for the plow lights to function hi/low but no truck lights with the blue, tan and pink on the other side. Please HELP ussmileyflag
  2. russ130

    russ130 Senior Member
    Messages: 204

    You should get a toggle switch to choose between the plow lights and the truck lights. What kind of plow setup is it? Green is high beams and tan is low beams on the truck both sides. These are headlights not turn signals so the same color is for both sides unlike turn signals which require a different wire for each side. Hope that helps and by the way welcome to the forum.
  3. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

  4. Kevin O'Brien

    Kevin O'Brien Junior Member
    Messages: 2

    You were 100% correct it is a meyers light setup with the fisher plow. Thanks it worked