1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

15 f250

Discussion in 'Ford Trucks' started by MXZ1983, Mar 11, 2015.

  1. MXZ1983

    MXZ1983 Senior Member
    Messages: 246

    We just installed a new Western MVP onto the front of a 15 F250 PSD. It sags enough that I can't drive down the road in full v with it up because the wings will touch the ground. Is ballast my issue? Or is there something to stiffen up on these newer f250 that I need to do. Have always had Chevy 2500HD that we crank up the torsion bars.
  2. allagashpm

    allagashpm Senior Member
    Messages: 797

    Just bump the wings out a click or two. When you add ballast it will be better
  3. seville009

    seville009 Senior Member
    from CNY
    Messages: 877

    That's what I have to do, even with 6,000 lb front springs and 800+ lbs of ballast in my 2006 F350. Just the way it is.
  4. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 12,174

    I'm 11-4ish with wings, slight bump. Without, its fine. I also have factory 20's with tires then the 17 or 18 in rims and tire combo.

    U have the 6K springs?

    Plow in proper config?

    Ballast will help out.
    Last edited: Mar 11, 2015