Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 39 Results
  1. 🔧 Truck & Equipment Repair
    I have a late 90s Hiniker straight blade. It had a white handheld joystick controller that stopped working, I bought an aftermarket handheld controller, when I angle the plow left or tight it angles for a half second then locks up like the solenoid shut. I have to bump the button 4-5 times to...
  2. Fisher Engineering Discussion
    Hello everyone, I've spent around 10 hours trying to troubleshoot and eliminate my way out of my current lighting issue and I've hit dead end after dead end. I'm currently adding new (used) wiring to one of my f-350s, an 06 to be exact and I'm stuck on the truck side so far. I have no low beam...
  3. Boss Plows Discussion
    I know i can take the boss rt3 power v off my 03 ford f350 and put it on my new 2019 f250. I have bought the newer carriage and can put that on but I'm wondering if i can get the wiring harness that will adapt to the new truck? Do i need the old harness with different headlight adaptors? Do they...
  4. Ram Trucks
    need some help. i have a fisher flex plow with a 3 port module. tried to wire a set of led plow lights to it but only thing that works is the high beams. not sure where i'm going wrong. where do my com wires go?
  5. 🔧 Truck & Equipment Repair
    I’m looking for part numbers for electrical components to make. 72” Moose v plow actuators and pump to operate. Don’t need up/down..will use winch for that. The company, Cambridge Metals that made the plows for moose to put their sticker on went out of business. Hoping a part numbers may help...
  6. Boss Plows Discussion
    Ok so I have a boss superduty, near the end of last season it seemed to be drawing extra power when moving, other then that good though. This year slightly worse it almost puts my gauge in the red when doing full raise or full angle (full left to full right etc) and the market lights draw a lot...
  7. Fisher Engineering Discussion
    I recently picked up a used 8' HD plow set-up from a 2008 Silverado 2500HD to go on my 2005 Silverado 2500HD. Push plates were perfect and mounted right up. Plow attaches to the pushplates without issue. However, the electrical is another issue. My buddy (who has had a number of Fisher plows)...
  8. 🔧 Truck & Equipment Repair
    hey guys i have a mm2 fisher with a 4 port iso mod on my 2006 dodge. i hooked it all up yesterday and everything worked fine until today. my parking lights(steady yellow) dont work anymore .... turn signals still work as well as headlights. i tried checking all the wires and connections but...
  9. Ram Trucks
    So to start off I know they don't recommend installing a plow on the truck because... 1. It's too high (1.5" over stock is way too much for the plow to be adjusted) 2. The winch could possibly interfere with the bracket without additional lengthened bolts or modified plow frame work (Western...
  10. Strobe Lighting
    So I may be posting on the wrong board but this is the only one that seems to have anything to do with lights. So here's my situation: I've put new plow lights on my plow. What I'm trying to achieve is to have the low beams stay on when I switch the high beams on. They aren't traditional plow...
  11. SnowDogg Snow Plows
    I bought a used MD75 the other day, and one of the plow lights is broken. I can't seem to find a replacement online and if they do exist I'm gonna take a guess that they're expensive. Also in my experience, I've found that almost all plow lights just suck in general. I do however have a surplus...
  12. 🔧 Truck & Equipment Repair
    I have a bobcat s250 that I use for snow with a box plow on it. I went to go get it going during a the storm we had Sunday and when I turned the headlights on it engages the Peking brake. So I cannot move with the lights on. I can move perfectly fine with them off and everything runs great...
  13. 🔧 Truck & Equipment Repair
    So I picked up a decent swing away Western 2000 Salter the other day and I am having a hard time tracking down the truck side wiring for it. Is it worth chasing down, its about $250 with shipping at the one place I found it but they dont have it in stock and have to get it from western which I...
  14. Used Plowing and Truck Equipment Forum
    I removed this from my truck after I bought it used. I have found part number MSC04316 on the wires. According to one site this is an older wiring harness and can be replaced with MSC8001. I have light adapters, battery cables, rocker switch and a few other shorter wires that came off the truck...
  15. SNO-PRO PLOW AND ACCESSORIES by Curtis
    This is the first Curtis plow ive ever owned, i bought a sno pro 3000 today for my dodge. when i bought my truck used it came with the plow frame and wiring for the curtis so i said heck ill just find one that will fit right on. i found that they made two different plug setups, my truck is...
  16. Used Plowing and Truck Equipment Forum
    Picking up an 8.5' Ultramount today. Looking for a cab command hand held controller, and wiring harness, H13 headlights. Also looking for the receivers for the mount. Truck is an 07 F350
  17. Fisher Engineering Discussion
    I have been diligently working to get my old speedcast plow up and running. I've changed the fluid cleaned the pump, etc... I've done some archived thread reading and I just don't get the black wire leading from the joystick. How does it activate the solenoid? I'm not running it from the...
  18. Western Plows Discussion
    Had my old 3 plug Pro Plus wired up for my new truck. Been having electric problems since then. After the first time I plugged the plow in the indicator for my bright lights stuck on. Lights turn from high to low beam but the bright indicator will not shut off. I pulled the connection off my...
  19. Boss Plows Discussion
    I am switching from a RT3 straight blade to an RT3 V plow. My question is whether or noth the truck side wiring is the same? I am under the impression that all I will need is a new hand controller. Any quick help would be appreciated don't want to let this deal go!
  20. Fisher Engineering Discussion
    I just bought an 8 foot fisher plow, with minute mount, off kijiji (I know....sigh). I'm realizing now it didn't come with "push plates" or a truck-side wiring harness. The plow side harness is there, and pump etc, and I did get a joystick control, but none of the "isolater" or light interface...
1-20 of 39 Results
Top