Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. Truck & Equipment Repair
    We've got a fleet of Boss V-Plows and after a recent storm, 2 of them came back a bit ****ed to the side. The yoke for the trip springs looks to be pressed over to one side completely. Before I go as far as pulling the center pin and pulling the blades to try to align, would shifting this bar...
  2. Used Plowing and Truck Equipment Forum
    New Fisher V-Plow that came with the truck I bought. Dealer used it maybe once to clear their lot. Comes with everything...I think (controller, wiring, and blade). Was mounted on 2017 F250 I don't foresee myself needing it so I'd like to sell it New they are $6,400? I'd sell it for $5000. Any...
  3. Western Plows Discussion
    I'm thinking about putting a 9.6 foot MVP on my 09 2500hd LTZ. Any opinions on if it will be too heavy for my truck? The plow is the older square headlight ultramount.
  4. Boss Plows Discussion
    hey guys I'm curious to see if any of you run an htx v-plow on an f150 or half ton. I'm currently in the market for one and would like to hear feedback on it. I'm really curious what the limits have been found to be as i would like to not over do myself with new customers. Also please no half...
  5. Equipment, Tools & Vehicle Pictures
    VPlow on Jeep Wrangler **please move to Jeep forum** Hello, I'm new to the forum. I've search but have not found a thread that discusses the odds and ends needed to put a BOSS UTV Vplow on my Wrangler. I've seen several members with this setup. I understand I'll need the RT3 mount for a...
  6. Boss Plows Discussion
    I have power to the plow. all lights work. plow will move into the v position. solenoid- when hit button on control have power to wire that goes to the plow. when i connected the plow it sparked when the two frames met. -which tells me the positive wire was touching the frame. moved the wires...
  7. Boss Plows Discussion
    So I have a 2014 Tundra Crewmax 4x4 and also a 2009 F-250 RWD. I know I need 4x4 for snow so I'm trying to decide if I should get a newer 3/4 or 1 ton truck or if I can throw the Boss Sport Duty plow. I do mostly driveways right now but have several commercial accounts that I could do snow...
  8. Used Plowing and Truck Equipment Forum
    I have a 1971 P24-27 -2D1 for sale. Under 25,000 original miles, comes with a V-plow, 11 foot bi-directional and an 11 foot wing. The truck is in very good condition. Engine is a 250 cummins with a 5 speed main and 4 speed auxilary tranmission. Truck is also a dimp bed. Call for more info...
  9. Commercial Snow Removal
    I have recently purchased another truck and need to decide what to put on it. My other truck has a Boss V and I love it, but almost went with Wide-Out when I purchased that one too. What sold me on the V was that it was a Boss. (Nothing against Western, just have always been a Boss fan) If Boss...
  10. Commercial Snow Removal
    I bought 2 Boss V's this year and outfitted one with a poly cutting edge. The edge has pre-drilled slots. After first use the edge pushed itself all the way up the slots. Then it wore down so fast it ruined the weld on the bottom of the plow. I've read that I probably should've used a piece...
  11. Commercial Snow Removal
    What is the advantages of a V-plow over the straight ones we use now for small to medium commercial parking lots? The lots we do range from 40' x 80' to 200' x 300'. We need to add a new plow or 2 this year, and would like to know if the V- plows are worth the money. How much time can you save...
  12. Used Plowing and Truck Equipment Forum
    Meyer 8'6" v-plow for skidsteer. Quicktatch plate for hydramac but can be switched for bobcat. $1,000.
1-13 of 14 Results
Top