Search Results for ‘solenoid’

Hello. I have a 8 2 boss v plow. I can’t get anything to move or the motor to run but it works when I jump the solenoid. I replaced the solenoid with a brand new one and the problem still exists. Solenoid clicks but the motor only engages when I jump it with a screw driver. I appreciate any help

PLEASE PLEASE HELP ME!!!!!! so my 7.5 poly plow has been acting up. The plow and motor act like I’m holding down the button after I’ve let go. Once it moves as far over/up as it can go it locks in and runs the motor and pump as if I’m holding the controller buttons. I just spent 350 on a new...

I have an older Pro-Plow (3-spring) unit that has given me reliable service for years. Lately, I go to use is and nothing happens. I remove the motor cap, clean the the cap contact surfaces & motor brushes, then everything works fine...until the next day when suddenly again nothing works...

Truck did not turn over this morning, dash & Daytime lights come on, then nothing, starter not engaging. Battery, NEW & charged up. Going to check starter solenoid when the sun comes up. Going to see if I can collect any codes if I can. Truck is new to me, any common issues related to this...

I have power to the plow. all lights work. plow will move into the v position. solenoid- when hit button on control have power to wire that goes to the plow. when i connected the plow it sparked when the two frames met. -which tells me the positive wire was touching the frame. moved the wires...

First, the background....I have a 2011 Western WideOut on a 2011 Chevy 3500. Lately the pump motor has sounded sluggish, which I thought was possibly due to it running on low fluid for a period of time due to a leak. The leak has since been fixed (four weeks ago) and was found to have...

I have been diligently working to get my old speedcast plow up and running. I've changed the fluid cleaned the pump, etc... I've done some archived thread reading and I just don't get the black wire leading from the joystick. How does it activate the solenoid? I'm not running it from the...

Change my blue every year...we are good there. New gaskets last year...should be fine as it worked for the season this is a e46 so it only goes up and down got some zap sounds our first snowfall and took it right into my shop, dropped the plow and it would not raise. The motor was not running...

I have a Boss 8' 1/2' straight blade plow that is not angling left and right correctly. Currently it will not turn right but left is fine. I took the wires from the solenoid that turn the plow left and put them on the solenoid that turns the plow right and it worked but it now will not turn...

I have a Curtis SnoPro 3000. It does work very well, (SOMETIMES). Sometimes, all it does is click the solenoid. I have cleaned the all the connections, replaced the solenoid and it still just clicks. Sometimes, it works very well then all of a sudden, it stops. Anyone have this issue? HELP!

Bought new Super Duty 8' with trip edge. After install and outside in cold (7 Degrees) plow would not lift, could click it up 1/4" at a time but when dropped again would not come up. Right/Left Angle work fine. Took back inside garage and worked fine. (Shop 1st time) So dealer call Boss Tech...

Hi everyone, I purchased a Ford Explorer Sport Trac with a SnoWay plow this past summer. I hooked it up and the plow worked great in August. I stored the plow in the garage from August until last week when we got our first 3 inch storm. I hooked up the plow and it worked fine. Up, down, left...

Hey, So I'm pretty new to this type of equipment and I cant seem to get the plow movin. I bought a new solenoid and installed it, I hit the switch and it came up and now it wont move again. I traced the switch connections and they seem fine. The harness's lights are and the solenoid clicks...

I'm wiring up my 2006 chevy 2500HD and i would like some advice on where is a good place to mount the motor solenoid? Also with the lights does the turn signal lights, green and yellow wire, hook to the green with blue and yellow with brown? thank for your help

anybody have the specs on the fisher solenoid? how many amps can it handle, etc.