Search Results for ‘silverado’

I have a 2006 Chevrolet Silverado 2500HD and a Boss 8.5' Straight blade plow. I bought a retired landscaping truck this summer to pull a new camper I bought. It had the hookup for a plow which I purchased a few days ago. So here is the problem. The right turn signal doesn't work. I tested...

I recently purchased a Western Defender plow 2nd hand that came off a friends 2013 GMC half ton truck I installed it in my 2011 Chevy Silverado 1500. Having an issue getting the head lights to work right. When on low beams, the right low beam does not work, the left does. When switched to high...

hey everyone i am new to this site but i see everyone is so helpful! i have a western plow on a 05 silverado 2500hd. when i press the down button the plow goes down... but... it will not touch the floor completely, it is like floating maybe less than an inch off the ground, and yes, the chains...

I am trying to install the electrical for a meyer plow on a 2015 silverado. I am currently unable to get power to the the pistol grip. Here's what i have done so far: -All wires have been run from the bumper to the battery and under dash - The 2 red wires from the headlight module are connected...

I have a 99 Silverado 2500. Newer body style 6.0 and I'm looking for a set of fisher push plates part number 7161 or 7169. Thanks

Here’s the deal. 2015 Silverado HD Drivers rear running light “reds” not functioning. But it works if you hit the key fab or touch the breaks. All fuses are good that I can find. Bulbs fine as the turn on but not in running light mode. Maybe a dual element bulb?. Odd but hopefully someone has...

My factory warranty finally expired on my 2013 1500 , so I decided to install a new Boss Standard Duty. I'm just plowing my own stuff, 2 150x 12ft drives, and my in-laws 600ft drive next door. I did the install myself, and other than an issue with getting the plow lights to work at first, it...

I have an 04 silverado 2500 (non HD), 4x4, 6.0L, auto trannt set up with a fisher minute mount. The tranny just started slipping and I dont want to use stop slip additive and risk completely loosing it during a storm. Im looking to get a rebuilt unit and put it in, but im not sure if exactly...

Hi, I have an 2000 silverado the power steering and rack was changed 2 years ago and this fixed the problem then. Now I i put the plow on the truck and I cant turn the wheels, power steering does not work. Unless I rev the engine the wheels will turn. I Take the plow off and the PS works...

Just picked up a 01 Silverado 3500 and am putting a MVP plus I have on it. Got the mounts on and they seem way low, is this normal? I will crank up the t bars but I don't think you can get more than an inch or two. How high should my mounts be?

Have a 2001 2500hd Silverado with a Boss straight blade and want to put a brush guard on it, just doesn't look right without one. Just curious if someone has found one that will fit with the plow on. If there isn't one out there, I doubt it'll be to hard to fab up a bracket to make it hookup to...

I've started a few threads the last week or so. This is my first plow, and I have gotten great help. Thanks to all. I'm installing a used Fisher Minute Mount SEHP with relay style wiring on a 2000 silverado 1500. It has 2 plugs. One with two pins and one with nine. I had to order a different...

i have a 05 1500 that im adding dual batteries with an isolator and a hiniker plow to. can i tap the power sources for both of them from the trailer brake port under the dash? if so, should i fuse both leads or is the circuit already fused? thanks, rob

Hey Guys - I'm getting conflicting answers from different people in regards to installing my unimount standard 7'6'' on my '04 silverado 1500... I've already installed the mount onto the truck and got the wiring in the mail today... I'm missing on cable unfortunately (61169)... my question is...

I'm downsizing what I run this winter due to having less contracts. I am selling as a package deal, but might consider selling just the truck and keeping the plow as a backup. Anyways, it's a 2005 GMC Sierra 2500HD with the 8.1L / 496ci big block and Allison transmission. It's a 4x4 regular...

Heres my 2000 Silverado 5.3L Z71 - Western UniMount - 96 Watt Hideaway Strobe Kit

My 2000 Siverado 2500 is a not an HD version, not many of these 2500's out there, I have the 6.0 liter engine, the plow really pulls down the front end, I do not want to install Tiimbrens, really do not want to crank up the torsion bars, can I upgrade the Torsion bars. I do not use a ballast...

Hi everyone, I'm new to the site and would like anyone's opinion on mounting a 7.5 ft Meyer on an 01 GMC Sierra ext cab. I have a blade, A-frame, wiring, and all I need is a way to mount it. I want to get a mount that is as close as I can get and fab it to make it work. I am having a ton of...

I was referred to this site, quite a bit of great info here already! I've surfed quite a bit of the classifieds area already, this is what I am looking for: I am looking for a COMPLETE plow setup for a 1999-2003 Chevrolet Silverado or GMC Serra 1500 1/2 ton 4x4 with a Front GVWR 3,925 Western...