Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Truck & Equipment Repair
    Can someone give me a quick step by step tutorial on repacking the lift arm on my fisher MM1 SEHP straight blade? My plow has been leaking slightly from the packing nut since I've owned it, but it seems to be getting a little worse lately. I also noticed the plow is making a new noise the last...
  2. Truck & Equipment Repair
    Hi everyone, So I am fairly new to plowing, and new to the site. I picked up a truck with a 7.5" fisher minute mount 1 (SEHP) already hooked up. The plow goes up, down and side to side without a problem, but it will not float. I am wondering if anyone has had any experience with this, I am...
  3. Fisher Engineering Discussion
    Any thoughts would help. Here is the problem. I took my SEHP off of my 9 foot MC, and put it on another 9 foot HD that I just bought a few months back. The MC was rotted anyways. Put the motor on the new plow. Worked for a short time in all directions. Cycled it though in all directions...
  4. Truck & Equipment Repair
    I've started a few threads the last week or so. This is my first plow, and I have gotten great help. Thanks to all. I'm installing a used Fisher Minute Mount SEHP with relay style wiring on a 2000 silverado 1500. It has 2 plugs. One with two pins and one with nine. I had to order a different...
  5. Fisher Engineering Discussion
    Hi, I bought an older fisher 8' MM1 plow with the v belt hydraulic pump. It came with the wiring, controls, everything except the push plates. I had planned to put this on a 2000 F350 but I have some work to do and more money to spend if I go that route. I have been trying to figure out what...
  6. Used Plowing and Truck Equipment Forum
    Hi, I'm looking to find a complete sehp or insta act pump assembly. I have an older mm1 setup with the V belt underhood pump and I'm converting it to electric/hydraulic. Also I am in Alaska so shipping will probably be hefty depending on how heavy. Its going on a 2000 F350 super duty with the...
  7. Fisher Engineering Discussion
    Hi folks... trying to narrow down this problem. My father was plowing with my truck yesterday and at one point the plow just stopped moving on him. I have had trouble with the harness connectors in the past but jiggling/unplugging them seemed to do the trick (i realize this is stupid but please...
1-7 of 7 Results
Top