Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 29 Results
  1. Equipment, Tools & Vehicle Pictures
    Hello everyone, new to this forum so here’s my first post. I bought a pusher for a my loader this fall and the guy had a sander he was looking to part ways with for dirt cheap. So I bit and loaded it on the trailer. Well, it’s not just any sander, it’s one that I cannot find parts for. Can...
  2. Fisher Engineering Discussion
    Hey everyone, so I made a huge oopsie this morning... I won't get into the exact how so we can keep this thread short... I have a newer 2018 I think, Polycaster the dual motor one. And I accidentally ripped the spinner off the back this morning and lost it on the road... Picked up no visible...
  3. Fisher Engineering Discussion
    I have a 18 or 19 polycaster I'm looking for some tips on, I haven't had to do much since I bought it, it's been very reliable. In the winter I spray it out well when I wash the truck which I try to do atleast once a week if the weather permits (have to wait for warm days since I don't have a...
  4. 🔧 Truck & Equipment Repair
    Hey! Sander worked perfectly fine yesterday, today the conveyor belt froze up, that was easily fixable. However immediately after that the controller was throwing a code, it seemed as though it was continuous but after some research, it is a single beep. Wiring and harness were all inspected...
  5. Fisher Engineering Discussion
    I have a brand new 3yd steelcaster electricand a brand new 2yd steelcaster electric that I purchased as a pkg deal. I only need one and will sell the other. I am conflicted on which one to install in my 2011 F350 Dually dump. I have always had a 2 yd in my previous trucks and find that its...
  6. Used Plowing and Truck Equipment Forum
    BOSS TGS800 Tailgate sander. 8cuft capacity, top screen with bag splitter, variable speed controller, RT3 attachment system with wheels for easy maneuvering. New paddle motor and gearbox replaced through warranty. Stored under cover when not in use. Only selling because I need a larger sander...
  7. Used Plowing and Truck Equipment Forum
    Brand new Airflo sander gearbox, clutch and sprocket, and bicycle chain. Off a 2 yard stainless Airflo sander. Also have a Clutch for a Buyers salt dogg 5 yd stainless sander. No longer have units these were extras on the shelves. Make reasonable offer.
  8. Introduce Yourself to the Community
    Any Input on DownEaster brand products!?
  9. Used Plowing and Truck Equipment Forum
    I'm looking for a tailgate sander or 7' box sander. I'm in BC but willing to travel for the right unit. Also looking for price per yard for reference as sanding will be a new addition to my company. Any brands of Sanders to stay away from!? Thanks for any leads!
  10. Used Plowing and Truck Equipment Forum
    Hello Everyone, I have recently sold all of our 1-2yd stainless steel Airflo sanders and have some brand new parts we had on the racks as back ups I no longer have a need for. Looking to make a package deal, priced below retail value. Gear box Clutch Sprockets & Bicycle chain Bearings Reasonable...
  11. Used Plowing and Truck Equipment Forum
    F/S 2009 model Salt Dogg SHPE0750 3/4 yd spreader. Poly/electric, around 5 feet long and 250ish lb dry. Built just like the bigger models. Spreads salt, DRY sand/salt (doesn't like wet) or even seed/feed. You can use it to spread seeds as well in the off season. Has vibrator, comes complete with...
  12. Used Plowing and Truck Equipment Forum
    $13,500 2006 Chevy 2500hd 96,xxx 4x4 Automatic Gas $2,000 Plow is 8ft Meyers Diamond with upgraded block- Could use a coat of paint and new cutting edge. $2,500 Sander is a Stainless Steel Flink with new gas motor and recent drag chain. Truck is in cosmetically fair/good condition. There are...
  13. Networking
    Hi I'm looking for a couple good subs in the Plymouth,Ma area.Sanders needed too.Must be available every storm and please be local,(508)726-3611
  14. 🔧 Truck & Equipment Repair
    I just got a used stainless pro caster w/ box control in the cab. There were 3 wires. Power. Ground. And the main cluster (the plug). Started the honda motor with the pull start to make sure it ran and it does. The PROBLEM I am having is the only thing that is working on the controller is the...
  15. Introduce Yourself to the Community
    Hi guys i am a new person here hoping to find some useful information. i do not know if I'm [/B]posting this the correct way. Heres my info: I am signed up for the state of rhode island to plow/ and sand. I have a 2001 f350 reg cab 8ft 4x4 single wheel gas with no bed on it. Im looking at a...
  16. Used Plowing and Truck Equipment Forum
    I have a Sno-way Stainless Steel Electric Sander. It ran fine last year. I have not touched it yet this season. Comes with the powerwire and relay from my truck. I am not doing any plowing anymore. It is the last of my plowing stuff. I have sold everything else.
  17. Ice Management
    Hey all, I am fairly new to plowing (this is my second season with a truck) but i have been doing snow removal for ten years (walks and driveways with shovels and blowers). This year we landed a really large account (approximately six-seven acres of parking) so I decided to buy a sander for the...
  18. Used Plowing and Truck Equipment Forum
    I have a brand new, never used Western Pro-Flo 1 with the mount, wiring and control ready to go. This is the in-bed mount and it and the control box are the only parts ever mounted on the truck. The salter never made it on and the wiring is still in the box with the sealed instruction manual...
  19. Strobe Lighting
    i have a 1993 Chevy k2500 extended cab and i wanted to get a beacon for it. i was wondering how to wire it to a toggle switch
1-19 of 29 Results
Top