Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 50 Results
  1. 🔧 Truck & Equipment Repair
    I have a salt dog shpe 1500 that wont spin. It was working fine until i accidently gave it too much material and it jammed. It sometimes gives me Code J but most of the time its flashing P. Is the motor going bad or its a Connection Issue. How can I test the motor? Thanks!
  2. 🔧 Truck & Equipment Repair
    Before I go on, yes I understand I can go get a complete harness and controller and solve the issue. However, I have a snowex 9300 wired as a true on/off. Switch goes on auger and spinner have full power. Auger is fine in this case but the spinner throws way too far and with way to much force...
  3. Employment
    We are seeking several snow removal contractors for high-touch commercial work in West and South Saint Louis County (Missouri). We are looking for 100% dedicated trucks with plows and 2+ cubic yard salt spreaders. We work every event and start before flakes hit the ground. This is high end...
  4. Ice Management
    We have a Boss VBX 8000 salter. The bearing is pretty stuck on us and we're having a lot of trouble getting it out to replace it. It's all pretty rusty and we're having trouble getting the rod to seperate from the bearing or the auger. Does anybody have any experience or ideas that might be...
  5. Used Plowing and Truck Equipment Forum
    used 1.8 cu yd polycaster spreader have harness and control new bearings last season new conveyor motor end of 2018-19 season. $2800 obo Plymouth Indiana
  6. Used Plowing and Truck Equipment Forum
    2004 International 4300 Sba, w/DT466e (Pre-Emissions) and heavy duty trans with 169,800 miles, air brakes, front tires @ 40-50%, and rear tires @ 75%. Swenson (common steel) hydraulic 10' V-box salter with auger (not conveyor) and pre-wet system, 32,000 gvwr. Runs great. There has never been a...
  7. Commercial Snow Removal
    Has anyone come up with a clever salt storage area for job sites? Out salt trucks come in loaded so that is not an issue but what i am looking for is a way to refill tractor mounted drop spreader, snowrator salt hopper and even a small trailer hitch mounted salter on the back of small...
  8. Used Plowing and Truck Equipment Forum
    2004 International 4300 Sba, w/DT466 and heavy duty trans with 168,800 miles, air brakes, front tires @ 50%, and rear tires @ 75%. Swenson hydraulic 10' V-box salter with auger (not conveyor) this delivers a smoother / more even spread and pre-wet system. Runs great. $28,750.00
  9. Used Plowing and Truck Equipment Forum
    SNOWEX 7550 SALTER NEW DETACHABLE SPINNER UNIT - general for sale - by owner https://newjersey.craigslist.org/for/d/snowex-7550-salter-new/6715319011.html SNOWEX 7550 SALTER WIRING HARNESS AND CONTROLLER - general for sale - by owner...
  10. Ice Management
    Folks, I did a stupid, didn't correctly tie back the truck side harness for my Western Stryker and on a particularly bumpy road, it drop to the ground and was damaged from dragging. So...... apparantly, you can't purchase a pigtail? Or can you? Looking for solutions including making my own...
  11. Used Plowing and Truck Equipment Forum
    I'm looking for a tailgate sander or 7' box sander. I'm in BC but willing to travel for the right unit. Also looking for price per yard for reference as sanding will be a new addition to my company. Any brands of Sanders to stay away from!? Thanks for any leads!
  12. Used Plowing and Truck Equipment Forum
    Hello Everyone, I have recently sold all of our 1-2yd stainless steel Airflo sanders and have some brand new parts we had on the racks as back ups I no longer have a need for. Looking to make a package deal, priced below retail value. Gear box Clutch Sprockets & Bicycle chain Bearings Reasonable...
  13. ATV / UTV Snow Removal
    Hi I can’t seem to find an answer anywhere so I’m reaching out to this forum to see if anyone can help me with ideas or solutions. I had an old 575 snowex tailgate spreader that I’ve attached to a pull behind trailer on my ATV ( sold by snowex specifically for a similar ATV pull-behind salter...
  14. Used Plowing and Truck Equipment Forum
    I have a used SnowEx 1875. It comes with the spreader, harness and controller. The auger is locked up. The spinner spins freely by hand but doesn't move when using the controller. The vibrator works fine. This spreader had the hitch mount, the 2" receiver is missing. I'm open to offers I'd...
  15. Used Plowing and Truck Equipment Forum
    This is an older Monroe UTG spreader for older one ton dumps. It's for dump beds 88" wide. The spreader body is stainless, it was painted green by the last owner. The auger is mild steel. I do not have a harness or controller of any kind. There is no spinner. I do have the weld/bolt on mounts...
  16. Used Plowing and Truck Equipment Forum
    97 International DT444 Auto 257xxx miles $8,500 OBO Henderson Stainless under tailgate salter New steer tires Brake pads/rotors/calipers fall of 2016 New floor in dump body and new lift cylinder New tarp Led work lights and strobes Boss plow mount (for 8 or 9 footers) and harness Located in...
  17. Used Plowing and Truck Equipment Forum
    Looking for : I am looking for dump insert salters, pick up inserts. Any condition with or without control. Feel free to call or text. 419-392-1875 Brian
  18. Used Plowing and Truck Equipment Forum
    $13,500 2006 Chevy 2500hd 96,xxx 4x4 Automatic Gas $2,000 Plow is 8ft Meyers Diamond with upgraded block- Could use a coat of paint and new cutting edge. $2,500 Sander is a Stainless Steel Flink with new gas motor and recent drag chain. Truck is in cosmetically fair/good condition. There are...
  19. Commercial Snow Removal
    Hey guys, I've been at the plow game for a few years now and up until now, my little fisher 1000 has treated me pretty darn good! I easily run bulk through it with a vibrator and would recommend it for anyone looking after small lots. However I have take on a bigger client and now getting out...
1-19 of 50 Results
Top