Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 17 Results
  1. Used Plowing and Truck Equipment Forum
    I'm searching for a Boss RT3 Smart Hitch 2 Snowplow Frame with pump and complete electronics. V-Plow or Straight Blade. Preferably an 8FT+ plow. I'm not interested in the plow itself so it can be rusted, all twisted up, or even missing. I don't need the left and right cylinders either but would...
  2. Used Plowing and Truck Equipment Forum
    This is a great condition 2016 Boss Stainless DXT 9.2' v-plow for 2011+ Ford Superduty. Please check other years it fits with dealer. We are moving and decided to sell, this is a great commercial plow, $8200 New before tax. Comes complete with hand controller. It is installed on my truck right...
  3. Used Plowing and Truck Equipment Forum
    I have a mint condition Boss RT3 mount for a 2007-2013 GM 1500. It has minimal wear. I can help with delivery within 60 miles from Indy.....$300....Bill
  4. Truck & Equipment Repair
    Ill try to keep this short & to the point but thorough. Have a few questions. SmartHitch switch on light tower Not working correctly. Just got plow , used, off same year truck as mine. Has set unused for close to 2 years that I know of. Pulled up to plow, laid wire harness out and rough...
  5. Boss Plows Discussion
    Ill try to keep this short & to the point but thorough. Have a few questions. SmartHitch switch on light tower Not working correctly. Just got plow , used, off same year truck as mine. Has set unused for close to 2 years that I know of. Pulled up to plow, laid wire harness out and rough...
  6. Boss Plows Discussion
    my driver side wing folds forwards when I back drag and makes it hard to clean close to things. what should I look for and what do I need to make my rt3 boss v plow do back dragging correctly
  7. Used Plowing and Truck Equipment Forum
    I removed this from my truck after I bought it used. I have found part number MSC04316 on the wires. According to one site this is an older wiring harness and can be replaced with MSC8001. I have light adapters, battery cables, rocker switch and a few other shorter wires that came off the truck...
  8. Truck & Equipment Repair
    new to the whole commercial plowing and realize that i need to have a back up truck due to possible breakdowns with main truck. have truck and a lead on a good deal for a used plow. i need the undercarriage(truck side) mount as well as wiring for truck(01 f-250) any year from 99-07 will work...
  9. Boss Plows Discussion
    Has anyone ever mounted a RTIi plow on a 2007 dodge 3500 So I have a 8'2" boss power v plow and I want to put it on my 2007 dodge 3500 mega cab but since they do not make the rtII truck mount for my truck I was told that I can use the rt3 truck side mounts and supports and just put my rt2 push...
  10. Used Plowing and Truck Equipment Forum
    Selling my 7'6'' Standard Duty Upgraded to a bigger plow and need to get rid of my old one Two years old Plow and controller only no push plate or wiring Will E-mail/Text pics if interested 2800 OBO [email protected] In Newtown, CT about 45 min from Hartford
  11. Boss Plows Discussion
    I am switching from a RT3 straight blade to an RT3 V plow. My question is whether or noth the truck side wiring is the same? I am under the impression that all I will need is a new hand controller. Any quick help would be appreciated don't want to let this deal go!
  12. Boss Plows Discussion
    Boss V plow. Plow wouldn't move. Pump ran but plow did nothing. So i changed oil. Still won't move. I took pump/motor out apart cleaned pump checked seal, and o rings, cleaned screens. all bearings are good. put back together. Same thing won't move. So i took it apart again. Noticed the...
  13. Used Plowing and Truck Equipment Forum
    Part # for the mount is lta3654c, and part # for the harness is msc4316, the cheaper the better, i have found a brand new bracket for $425, and brand new harness for $150, so i would like to find a used one a hell of a lot cheaper, thanks
  14. Used Plowing and Truck Equipment Forum
    Looking for RT3 and wiring harness for 03 F550. Please call John at 618-779-2842 if you have one. Thanks
  15. Used Plowing and Truck Equipment Forum
    Looking to buy a used boss snow plow mount for a 1993 chevy 1 ton duelly need the mount I have a excellent cond. GM 4500 - 5500 mount for sale also or to trade straight up between the two any help would be great
  16. Used Plowing and Truck Equipment Forum
    Please see my ad on Craigslist. Thanks. http://worcester.craigslist.org/pts/1373639441.html
1-16 of 17 Results
Top