Search Results for ‘pump’

I’m looking for part numbers for electrical components to make. 72” Moose v plow actuators and pump to operate. Don’t need up/down..will use winch for that. The company, Cambridge Metals that made the plows for moose to put their sticker on went out of business. Hoping a part numbers may help...

Hello all, I have a problem that the plow won’t raise. I’ve scoured the Internet and can’t find a similar situation. If I’m not pushing snow, I can raise and lower all day long. Sometimes (45% of the time ish) when I hit a snow bank, the plow won’t go up. I will have to keep hitting raise and...

New to forums, this is my second post on anything, so here it goes. I have an old Western Unimount with solenoids on the power pack that I bought a few weeks ago, I got it mounted and everything worked fine. I drained the hydro fluid, it was blue and still looked good. Removed the hoses and...

My brother and I recently purchased two plows from an Indianapolis International Airport employee. According to him these two plows, an 8ft. and an 11ft., were retired from airport service. We are trying to identify the smaller of the two. We believe it is a Meyer ST plow however we are not...

I have a stainless 8'6" xv2 plow. Recently when I plow, I get about an hour into it. I'll be pushing a snow bank back and either the pump or motor starts making a whining sound and keeps making the sound for about 30 seconds. After that, within one or two passes all functions will stop working...

Ok guys, I have been reading these forums for years and never thought I would have to post my own thread but here it goes. I have read every possible thread on this subject on Google and have yet to figure out my problem. I have a new boss 9-foot 2 dxt, the issue I am having, is the plow will...

I have a fisher fish-stik 8276 control, that I am trying to figure out how. it is supposed to be wired into the pump assembly. It came with my plow. I got the plow second hand they just cut the wires from the controls off and the wires from the pump. I have wires coming from the pump assembly...

I have an older western plow maybe like 12 to 15 years old, I was plowing recently in the last snow storm everything was working fine then all of a sudden the blade would not go up or down or left or right. I drove it back to the house and started diagnosing everything, cables all looked fine I...

Hey there, I've been thoroughly digging for answers to this, but couldn't find any. I have a 1993 F250 with a similarly aged Unimount Western setup. It's been giving me issues since I've had it. Basically, it takes about 7 seconds to raise the blade from the ground to all the way up. This is...

Hey Folks, New to site, having an issue and no time to for it to sit at a shop. 2010 MVP 9.5 Wester. Handheld Controller. Fluids changed twice annually. Over the last two days (Temperatures went from -9 -->+9 -->-9 with rain and snow in between) The pump is internmittently running when no...

Hey, new member to the forums looking for some help. I have a 78 Jeep CJ5 With a Plow installed from AMC/Jeep (in 1978). Anyways long story short, the pump didnt work yesterday, (Would hum lightly but wouldnt whine like it normally does)... Then after manually moving the plow around it decided...

This V was mounted on and 05 f250 and broke the plow side frame mount at the bend. All parts are available except the 2 wings, plow side frame, and the light masts. Let me know what parts your looking for.

Having issues with a Boss RT2 V-plow. While plowing today the plow stopped working so I checked the connections and the battery terminals at the plow side were loose. managed to tighten them a little and it worked for a while but was slow. Back at the shop I tightened them down good but now the...

I spent most of yesterday chasing a problem that happened last year…I only plow my driveway (the truck never leaves the yard) so I ended up doing more shoveling than I would have liked….I hope this isn't a trend for this year First and foremost I searched the forum before bugging you all and I...

Hello i have purchased a 6 1/2 foot sno way plow recently and i just tryed it out. The left and right cylinders work fine and so does the up position on the up and down cylinder. I cannot get the plow to go down. I do not have the plow mounted on a vehicle yet i just am pushing against the frame...

its a western unimount i need to hook it up to an 05 f250 superduty 2wd the pump is cracked it will lift but wont stay up dont have any brackets its gonna snow soon and dont have the plow ready scrambling to get it together 18158221247 call text any time gotta get that plow or another plow on my...

Hi, I'm looking to find a complete sehp or insta act pump assembly. I have an older mm1 setup with the V belt underhood pump and I'm converting it to electric/hydraulic. Also I am in Alaska so shipping will probably be hefty depending on how heavy. Its going on a 2000 F350 super duty with the...

For sale is a 7.5ft Western plow with fresh rust proof paint and a brand new cutting edge. I was told this plow was off an older Dodge, however I am unsure on this. Also included is the Western Mount and Pump (this is the cable control style pump), and all wires and inside controls. Included in...

Hello, Last fall I moved to a home in the foothills outside of Boise and purchased an early 60's CJ-5 Jeep with a Meyer plow/pump to maintain our driveway. This summer I wanted to spend some time learning more about maintaining the plow and locating parts to have on-hand to keep the plow...

I have a Meyers E-57H Plow/Pump. The motor in the pump is working however the pump itself won't move. All the cellinoids have power to them and are working, there is hydrolic fluid at the proper level but I just can't figure out why the pump isn't angling or raising the blade. Could this be...