Search Results for ‘mm2’

Hi guys. First post here. We have a fleet of 10 Ford trucks all with MM2 Fisher fleetflex plows. Did an install last week on one of our 2019 f550s. All good worked great. Did another install today on a 2019 f550. Brand new harness, controller, etc etc. went to plug into the plow and all seemed...

I recently picked up a used 8' HD plow set-up from a 2008 Silverado 2500HD to go on my 2005 Silverado 2500HD. Push plates were perfect and mounted right up. Plow attaches to the pushplates without issue. However, the electrical is another issue. My buddy (who has had a number of Fisher plows)...

I do a lot of jobs that I typically back drag with the cutting edge. Replaced my MM1 with an 8' MM2 I'm thinking it may be time to get a back drag cutting edge for a better sweep. Thanks. If not I see some new ones around $140 online.

Hey guys, I recently bought a 2014 fisher mm2 3 plug setup. Im trying to piece together all the parts i need to get it hooked to my 2008 Ram 2500. I bought the truckside mount and the controller. Now i just meed to put together the wiring harness. My questing is can any truck harness that is...

Hey i just bought a second hand plow and truck mounts. Could someone please help me identify which years gm trucks this mount will fit. I'll attach a few pictures. Thank you.

Hi, I have a Fisher HT on a 2015 F150 (5.0, 145in, plow prep) that was installed by a dealer. I just got home and the driver side park/turn light on the plow headlights stayed on when the truck was turned off, even when restarted and plow prep was switched on an off. For now, I unplugged it...

hey guys, I have the truck side for a fisher mm2 2 plug, and a 3 plug MVP plus. Is there a converter I can get to swap my truck side to accept the 3 plug Plow or vice versa? Just trying to figure out the best way to put this on (If it's even worth it / possible to do this without buying new)...

20170826_193400 by ddatv57 posted Sep 2, 2017 at 9:59 PM20170703_122748 by ddatv57 posted Sep 2, 2017 at 9:59 PM20170902_153450 by ddatv57 posted Sep 2, 2017 at 9:59 PMI was brought to this forum site because I was trying to do a little research myself to try and find out if my Fisher 8' plow...

Any suggestions for locking a Fisher HT series 7.5 ft. mm2 plow to prevent theft? I've seen the real expensive locks and don't want to spend that much unless I have to. Thanks for any feedback.

Hi, First snow of the season here in Maine, first post as well. I have a fisher mm2 plow. There is power to the plow connector and power to the fish stick connector but when i push the button on the fish stick to turn it on... nothing. Lights work on the plow frame. I store the plow indoors...

Hey guys, I just finished up changing the fluid in my Fisher MM2 plow. But for some reason now when i hit the plow to angle left it pop up a little but not a lot, just about an inch. Im not sure if this is serious or not. All fluid change and air purge procedures were followed. Hoses were...

Im selling this for $4,200 I have a Fisher XLS that has only seen 1 year of plowing. I bought it for last season but this year I decided to retire from the plowing industry. So it only saw one season, and here in New Hampshire that season was only about 8 storms when we normally get 16-20...

Hi I have a question for anyone who might know, first let me tell you what equipment I run. I have a Western wideout with ultra mount (douglas dynamics) I have a Blizzard 86110LP with the blizzard mount which they happen to use the same mount that attaches to the truck as the western wideout...

My fisher 4 port 26400 is making clicking noise and my driver side headlight is out, I put new head lamp in and still out high and low beam. Is module bad , ,it was working at end of last winter. I took off and cleaned all contacts but still the same. This is with plow off I haven't tried it...

Got some good used 7174 push plates with hardware on ebay I'm trying to sell. Item#290389545871

Don't need the plow anymore. Everything works perfectly. Just the plow no push plates or wiring. $1950 obo. CL ad for more pics... http://hartford.craigslist.org/pts/1048011234.html