Search Results for ‘mm1’

Hello everyone. I’ve got an older fisher mm1 I’m having issues with. The plow is new to me and I don’t know much about its past. It is struggling to lift the blade and even sounds like it’s having a hard time angling side to side. The motor sounds like it’s bogging down and it doesn’t sound as...

Hello everyone. I recently purchased a MM1 plow for my 2002 f350. I’m having an issue where is moves slowly side to side. Up and down seems to be working fine. I would say it takes about 12-15 seconds to go from full left to full right. It’s moves slowest when it’s angled farther and slowly...

This is my 95 2 door tahoe w 7.5ft fisher mm1. The front end sags a good amount w the plow raised. Wondering what I should do? I've been looking at my different options but unsure what the best route would be. If someone has any recommendations or a similar setup w pictures that would help a lot.

Hi everyone, I'm new here. Been plowing 14 years with a 8 foot Fisher cable control minute mount one setup on my ram 3500 srw. My old cable pump has had it, my arm has too from the cable control joystick, so I was able to purchase a later minute mount 1 solenoid control pump. I'm looking to...

So I have not had the need to plow this season here in Massachusetts. (Mainly due to me being out of state for every storm) I decided to put the plow on in case one of my kids might need to use it. SO I popped it on the other day and am not getting ANY power to the motor from the controller...

I'm Got a Blade in a Minute Mount 1 System Rusting Out. I Heard Someone on Here Has a Poly Solution. Thoughts?

Is there any way to rewire the new intensifier lights 38800 to work on an MM1 two plug system? I’m stumped.

Hey guys, I recently picked up a 2 plug ezv for this winter with the 10 pin hand held controller. I have a mm1 straight blade on the truck now that is a 2 plug. I know I need to change the control harness, but I am having an issue determining which harness I need to buy. The truck is a 1998...

20170826_193400 by ddatv57 posted Sep 2, 2017 at 9:59 PM20170703_122748 by ddatv57 posted Sep 2, 2017 at 9:59 PM20170902_153450 by ddatv57 posted Sep 2, 2017 at 9:59 PMI was brought to this forum site because I was trying to do a little research myself to try and find out if my Fisher 8' plow...

So I put my MM1 away 4 weeks ago when it stopped snowing here in Massachusetts, Well Of course mother nature wants to give us a reminder that she is a strong woman. Anywho. I just went to hook it up and my nice, but a little mechanically challenged neighbor wanted to help. He grabbed the...

Can someone give me a quick step by step tutorial on repacking the lift arm on my fisher MM1 SEHP straight blade? My plow has been leaking slightly from the packing nut since I've owned it, but it seems to be getting a little worse lately. I also noticed the plow is making a new noise the last...

Hi everyone, So I am fairly new to plowing, and new to the site. I picked up a truck with a 7.5" fisher minute mount 1 (SEHP) already hooked up. The plow goes up, down and side to side without a problem, but it will not float. I am wondering if anyone has had any experience with this, I am...

I have an HD mm1 on a 2012 F250 and it doesn't lift as high as I would like. I don't want to shorten the chain because there's times there isn't enough slack to keep the plow floating on steep crests. Can I install a longer lift cylinder - like to a 12"? Seems like that would give me the lift...

truck is a 98 dodge ram 2500. need help asap with wiring. plow lights wont come on. only wires available now is 1 purple on passenger side and a brown wire and also a grey wire on drivers side. what ties into what?

This a repeat problem for me and was wondering if anybody else was having this problem I have a MM1 plow with belt driven pump on a 97 GMC truck. Extremely pleased with the plow and pump, as I have run it since the truck was new with no problems AT ALL other than this issue. The last three...

Hi folks... trying to narrow down this problem. My father was plowing with my truck yesterday and at one point the plow just stopped moving on him. I have had trouble with the harness connectors in the past but jiggling/unplugging them seemed to do the trick (i realize this is stupid but please...