Search Results for ‘hiniker’

Hi, I’m new to the community. I just bought a Hiniker 8’ C plow that was converted to a straight blade. My issue is that I can get the plow to raise but I can’t get it to go any other direction. Can I get some insight on this issue. I have checked all connections and relays are good. If this...

I need help, and I have found a lot of help on this site in the past. I just got a new truck and changed the wiring over, and when I got to turning on the plow nothing. No clicks at the solenoid, no lights. My truck lights work, but the remote won't turn those off when I switch to "plow lights"...

Have an 05 Hiniker straight blade, which has always worked great until yesterday. Hadn't used it for a few weeks, hooked it up yesterday, controller light turned on, tried to raise plow, nothing, angle plow, nothing. Just click click click. Motor ran fine with jumper cables, I started...

So I just put a new AFE turbo, wastegate, elbow plus dorman manifold on my '05 3500 SLT quad cab Cummins 4x4, AT [rebuilt] 4.10 gears. Truck has 193K on it. Stock turbo went. Put on new parts and 30 miles later the motor dropped a cylinder. Oil in exhaust. So my backup truck is down this...

Used Boss 9.2 Poly V Plow for sale. This plow came with a truck we purchased and we do not need the plow. Plow works like it should cutting edges are good. No holes is poly. I do have a mounting kit available (brackets and wiring. No controller) that came off a 1999 F350 if any one is...

Hello, I'm actually asking this question on behalf of my dad who is not very computer savvy. He used to have a 2003 Ford F250 Super Duty with a Hiniker V-Plow. Unfortunately, I was recently involved in a car accident while driving his truck and I rolled it and totaled it. The plow was not on...

I got a Hiniker plow from a relative and have it attached to my Chevy Silverado. It works great but would like to get the manual in case I need parts or to do maintenance. For example, it is not very high off the ground when in the up position, and I wanted to change the hole the hydraulic lift...

Im looking for a used Hiniker mount for a 99-04 f250 in the southwest Michigan area. Willing to drive a reasonable distance also.

Hey guys new to the site just want to go ahead and thank everyone in advance. So I'm getting my 2010 gmc sierra 1500 ready to plow, I've installed all terrain tires also installed a 2 inch motofab leveling kit and I purchased TIMBREN #GMFK15CA suspension kit for the front. The leveling kit...

Hey guys and gals, I'm looking to get a Hiniker QH1 mount for my 2003 F250. The Hiniker mounts for the 99-04 year range should work. I have cash and also a QH1 mount for an 02-08 Ram 1500 should that interest anyone. Closer to Fond du Lac, WI the better. Thanks for reading, let me know! PFA.

SnowGo loader mounted snowblower 5.9 Cummins engine runs great. Auction ends 11-1-17 Auction also has 3 Hiniker plows on it. https://www.k-bid.com/auction/22032

Need some advice from those of you who are experienced with Hiniker plows since this is my first one. I had the dealer put my plow on and adjust everything, worked great for the first two snows. On our last snow, I have the plow in the V and lower it, the two outside wings are in the air still...

Hiniker C Plow Issue Hello, I just purchased a Hiniker C Plow, believe that its model 3800. I am having what I believe is wiring issues and could greatly use some guidance! For some reason, the plow is angling to the left anytime that I try and move it up, down, or curl or uncurl the blade...

I have an extra truck craft spreader tc-130. I have a spinner motor to go with it but it needs replaced. Bad control box. Asking $1500 located north of Pittsburgh

This V was mounted on and 05 f250 and broke the plow side frame mount at the bend. All parts are available except the 2 wings, plow side frame, and the light masts. Let me know what parts your looking for.

I believe its a hiniker 2801. I bought it used and its been sitting for about 5 years. hooked everything up, and it functions side to side just fine but wont raise. when I lower it the float light comes on and stays on unless I shut the joystick off. when I try to raise it I don't hear any...

Check out my Hiniker page on Facebook www.facebook.com/Hinikersnowplows Post your pics of your Hiniker Equipment on the page.

8ft hiniker poly c-plow with wiring & controller. also mounts for 02-08 dodge 1500, 03-09 dodge 2500-3500. Asking $2200 obo. Need 2 move just taking up space, any reasonable offer will be accepted and I will seperate items.