Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Chevy Trucks
    I just picked up a 1999 Chevy Silverado 2500 with a Meyers C-7.5 mould-board, E-57 pump, what looks like an MDII mount setup with Nite-Sabre (not the Sabre II) plow lights, using 07347 light control modules (newer-style with accessible fuses). The plow mechanics and controller work like a dream...
  2. Truck & Equipment Repair
    Hi All, New to the site. Recently picked up a 2005 Silverado 2500 HD with a Western 7.5ft Ultramount. Has 3 harness connectors from the truck to the plow. Plow works great in all directions. Amber lights work on both sides. Driver side the headlight and hi beam work perfectly however on the...
  3. Truck & Equipment Repair
    Hello! I've got a western uni mount 2 that needs the headlight housing adjusted up, Went the loosen the two bolts on the bottom, and the whole stud started spinning. Can't get a wrench on the nut up top so I'm just curious if anyone has figured out a way to solve this?
  4. Boss Plows Discussion
    Ok so I have a boss superduty, near the end of last season it seemed to be drawing extra power when moving, other then that good though. This year slightly worse it almost puts my gauge in the red when doing full raise or full angle (full left to full right etc) and the market lights draw a lot...
  5. Chevy Trucks
    Good morning, I just had a brand new Fisher 9’6” XV2 stainless installed on my 2018 GMC Denali HD Duramax. The truck has the VYU plow prep package with the dual alternators, and the complete system was installed at a reputable Fisher dealer. The plow and all of its equipment work fantastic. My...
  6. Fisher Engineering Discussion
    On 10/25/2018, I had my SD Fisher plow moved from a 2014 Tundra to a 2019 Tundra (with LED headlights). It was done by a Fisher Plow dealer. I purchased a new wiring harness, that supposedly addressed the fact that my new truck had LED headlights. When the job was finished, I got a warning on...
  7. Truck & Equipment Repair
    Hi, I have a Fisher HT on a 2015 F150 (5.0, 145in, plow prep) that was installed by a dealer. I just got home and the driver side park/turn light on the plow headlights stayed on when the truck was turned off, even when restarted and plow prep was switched on an off. For now, I unplugged it...
  8. Truck & Equipment Repair
    I’ve had this plow since new in 2005 and it’s been on the same truck (99 silverado 1500). A few seasons back the high beams stopped working and I never paid much thought. Today I’m installing new headlights and checked the contacts for power and had zero. I pulled up the vehicle side schematic...
  9. Truck & Equipment Repair
    So put a brand new fisher extreme V on my 2011 GMC Sierra today. My truck has the spider aftermarket projector headlights. Everything on the plow works minus the headlights. I have the marker lights but no turn signals in them when the blinker is activated. The lights on my truck stay on and...
  10. Fisher Engineering Discussion
    I installed the wire harness and mounts on my 13 2500hd and everything worked as it should except the driver side low beam headlight on the plow hi beam worked fine. When the plow was not on the truck everything worked fine high beams and low beams. I assumed the light bulb burned out on the...
  11. Boss Plows Discussion
    First year plowing snow. I have a 99 F250 Super Duty Diesel with a 8.2 straight blade. My plow lights will work on high beam only. I have red, white and blue wires from the harness to my headlights on the truck. There are 4 relays, I switched the relay that has the red/yellow wire with the blue...
  12. Truck & Equipment Repair
    Hi Guys, I don't post very often, (I do spend time reading the posts on the site this time of year though), but when I have something useful I always try to share it. I always have appreciated it when people take the time to post info that helps others out. I have a couple things to share about...
  13. Fisher Engineering Discussion
    Can anyone tell me why when I plug in the lighting plug to my plow my trucks headlights go off (as designed) but the headlights on the plow don't?? I have checked all the fuses on the harnesses but they're all good. I would appreciate any thoughts and ideas on this. The closest Fisher dealer...
  14. Used Plowing and Truck Equipment Forum
    I have a 4 Port Isolation Module from 04 Chevy. I have the headlight wiring harnesses as well. Looking to get $300. The stuff is a couple years old and in great shape. Works perfect. Just took it off my old truck to get a new one. Please let me know if you are interested. I am willing to ship...
  15. Chevy Trucks
    I have a 93 chevy 1500 with the single headlights. i have a wiring harness for a 88-98 chevy but its the dual headlight set up. can someone please help me with how to splice/modify the wiring harness to fix my truck. PLEASE!
  16. Fisher Engineering Discussion
    I have a 2002 Silverado 2500HD with a Fisher MM1 Solenoid Electric Plow. I can't get the headlights on the truck to shut off at all. Ignition switched off, key out and the lamps just keep on beaming. I also can't get the plow lights to come on when I connect the harness. I've even tried...
  17. Chevy Trucks
    I have a 2002 Silverado 2500HD with a Fisher MM1 Solenoid Electric Plow. I can't get the headlights to shut off at all. Ignition switched off, key out and the lamps just keep on beaming. I also can't get the plow lights to come on when I connect the harness. I've even tried pulling any...
  18. Western Plows Discussion
    I have a 2000 Ford F350 with a 7.3 powerstroke. I bought a used western unimount plow and the wireing it was off a truck identical to mine. i hooked up all the wireing. the plow itself works great but the lights WILL NOT WORK. I have them hooked up right from wat i know but they dont worrk. My...
1-18 of 18 Results
Top