Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 12 Results
  1. Truck & Equipment Repair
    Hi all my name is Tom. I have a 2000 f-350 ford with a western unimount 2 plow. I am having an electrical issue. power light on joystick blinks and shuts off. I cleaned all connections and added di-electric grease. Could issue be with joystick? Whole unit is 5nyears old I bought it new. Thanks
  2. ATV / UTV Snow Removal
    It's time for a new battery on a JD Gator 625i with a dump bed. I'm running a Boss Power V Xt. Of course there are headlights, but also a strobe, front and back LED lights on the roof, and a cab heater. Would like your thoughts on a suitable battery to run these accessories in cold weather...
  3. Fisher Engineering Discussion
    Hey guys, first time posting on this site, lots of great information on here. I'm from Alberta, Canada and instead of using salt to melt the ice, we use crushed rock chips to give vehicles and people traction. It is just too cold to use salt. It seems these rock chips are tough to spread and...
  4. Used Plowing and Truck Equipment Forum
    F/S 2009 model Salt Dogg SHPE0750 3/4 yd spreader. Poly/electric, around 5 feet long and 250ish lb dry. Built just like the bigger models. Spreads salt, DRY sand/salt (doesn't like wet) or even seed/feed. You can use it to spread seeds as well in the off season. Has vibrator, comes complete with...
  5. Truck & Equipment Repair
    So the bucket stopped moving. After some time of frustration and searching forums I found that it could be a fuse. The fuse for switched attachments. Replaced it and it worked fine. After two weeks it blew again. When i tried to replace it the second time, it blew at contact. So i'm guessing...
  6. Ice Management
    I am installing a Smith spreader and was looking at a couple of options for the wiring. I am trying to decide on keep it simple or add some features. I have the Series 2 spreader which is 1 electric motor and 1 speed. Option 1 Traditional Solenoid or Trombetta Bear DC Contactor ( I have read...
  7. Truck & Equipment Repair
    I have a Curtis SnoPro 3000. It does work very well, (SOMETIMES). Sometimes, all it does is click the solenoid. I have cleaned the all the connections, replaced the solenoid and it still just clicks. Sometimes, it works very well then all of a sudden, it stops. Anyone have this issue? HELP!
  8. Truck & Equipment Repair
    I've got a GMC 3500 with an electric/ hydraulic dump body on it. Whenever I go to raise the hoist, the head lights come on dimly and the horn sounds and if the button is held for anymore than 2 seconds, the truck stalls. The solenoid on the hoist motor clicks even though I just replaced it. The...
  9. Ford Trucks
    (Unsure if this is relevant) Today I replaced the windshield wiper motor. I had to splice the ground. I removed the battery from the truck. Plugged everything back in - wipers worked, truck had power. I went to start it and it wouldn't even turn over or click - no sound at all. No change when I...
  10. Ford Trucks
    I have a 94 f 150 4x4 xl bare bones looking to mount fisher model g that was removed from gm product. Is it easier to fabricate or try to locate a bracket? Also looking to do away with engine driven pump and go electric any help? Thanks
  11. Truck & Equipment Repair
    I was redoing my 7 pin trailer hookup today. The pins were all corroded - think the salt has anything to do with that?:dizzy: Anyhow, she drank the last Diet Coke, and we didn't have any vinegar. And I was definitely not going to use my last half of a Moxie. So I looked around under the sink...
1-11 of 12 Results