Search Results for ‘e47’

So I can angle the plow to the right where the driver side ram is fully extended but it will not angled the left at all and when I disconnect the hoses and connect them each cylinder together I still can't move it back and forth what would cause that I'm new at this is my first plow and I'm very...

Hello, looking for some help. Our e47 plow was working fine. It started acting up where it wouldn't turn right until you hit the joystick 5 or 6 times. Now it won't turn right at all. Goes up and down fine and to the left fine. Has new motor, new oil, new hose and coupler upgrade kit...

Hey everyone having issues with my e47. Been looking on here at posts and have tried multiple things. Anyway put the plow on for the year and everything worked great for the first two snows then while plowing the next time I made it halfway through the job and the plow started moving slower and...

Hey guys, I just bought a plow truck with a Meyers 7 1/2 blade with an E47 pump set-up. So the plow moves up and down just fine. It does not move side to side under its own power. I replaced the A, B, C coil and valves thinking it would be a bad valve/coil and to make me feel stronger about not...

Hey guys, I'm having a temperamental E47 pump that's refusing to be fixed. It wont hold angle/pressure when angled right. The unit initially has the non adjustable crossover relief valves so I replaced those. Didn't work. I changed the C valve with a brand new valve/o-rings. Didn't work...

New to site, and looking for a plow harness for an older e 47 plow pump. I have a working plow and harness now, although its initial installation into my truck was a wreck. It is hacked where ever it could be, im looking to install a stock application plow harness into my 99 dodge ram. its...

Hi guys, first post here. Aggravating problem here... I have an older 7.5' E47. Early in the season it started moving slow to the right when it hit the center position (then would move right only a little at a time when I tapped the right button - which then stopped all together.) I had replaced...

I was wondering if you can run some ATF in the meyer pumps? It is just an old back up truck of mine but likes to freeze a lot. I know its cause of mater getting in it some how from a bad seal or something but Dont like buying that $8.00 a QT blue oil for the meyers. All of my other plows are...

Guys, I need a Meyer 17000-001 mounting frame to mount my ST-84/ E47 pump onto my 1975 Jeep CJ5. I just need the upper and lower mounts and the clevis frame where the pump connects. New or used is OK. I have mounting frame from the 1965 J-3000 that I can sell or trade if anyone needs that...

I have an older (1995) E47 it was rebuilt 3 yr ago. Plow raises and angles very slow. The latest issue was the plow did not raise or angle at all. I let it sit over night and everything was fine. Battery and alternator are good. Could this be a motor problem?

Well I used the truck to plow my driveway Wednesday evening, and went to do a touchup last night because there was some heavy winds, and now the plow won't move. I can hear the motor making noise (and although I just bought the truck recently, I can now see the pump weeps some) so I assume it...