Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 33 Results
  1. Used Plowing and Truck Equipment Forum
    In Search of a Curtis Sno Pro Mount for a 1997 to 2006 Jeep Wrangler. Truck side wiring also. Please help. Thanks, Matt in CT
  2. Used Plowing and Truck Equipment Forum
    Hey guys, I am looking for a mount for a Curtis Sno Pro 3000 7'6" Plow, needs to fit on a 2004 Toyota Tundra. ANY help is appreciated! Thanks!
  3. Commercial Snow Removal
    I'm in my second year of major commercial plowing and have used nothing but Curtis on my two 2500's. As I'm sure almost everyone knows, Curtis has discontinued plows and parts are starting to get VERY expensive. I've had minimal breakdowns with my plows so with the recent purchase of my 3rd...
  4. 🔧 Truck & Equipment Repair
    I’ve had this plow since new in 2005 and it’s been on the same truck (99 silverado 1500). A few seasons back the high beams stopped working and I never paid much thought. Today I’m installing new headlights and checked the contacts for power and had zero. I pulled up the vehicle side schematic...
  5. Used Plowing and Truck Equipment Forum
    lowering price to $600. 7' plow, steel frame with poly blade in good working condition. I had this on a Tacoma that I just sold. You would need a Curtis mount for your truck. Working well, serviced last fall - cleaned out and all hoses replaced. Near Keene NH
  6. Residential Snow Removal
    I know there probably isn't a mount exactly for chevy Colorado but maybe a similar chevy or other truck that could be adapted by a welder for the Colorado? Maybe I would get 2 mounts, one for plow, one for truck and see if welder could do some magic? Any ideas would be appreciated. Thanks!
  7. Used Plowing and Truck Equipment Forum
    Working well, full service this season, all new hoses. For sale in May. $ 1,500. Located in NH. Also Toyota Tacoma 2003 mount available, a little bent but mates up OK with the plow. $200 after plow is sold. Keene, NH area.
  8. Chevy Trucks
    New to this forum, if I am on the wrong thread or not following the SOP's please bear with me. I have a 1995 Silverado 2500 4x4. I am looking at a Curtis Sno Pro 3000 that a friend of my brother in law has. Plow is older but appears to be in decent condition, price is fair. But the seller only...
  9. Meyer / Diamond Products Discussion
    I need to rebuild our farm plow truck's pump/cylinder, but the ID plate is long worn away and not sure what it is. Any help in identifying the manufacturer and/or model would make ordering parts for it a lot easier. It is a simple electric over hydraulic up/down only setup and quite old - it...
  10. Used Plowing and Truck Equipment Forum
    Looking for a used Curtis 1FK46 for a 2012 Ram 1500. Thank you
  11. Used Plowing and Truck Equipment Forum
    Wtb Curtis 1fk22 frame For a 2003 Tacoma
  12. Site Help and Suggestions
    Hi, I was looking for and not able to find the Curtis / Sno-Pro section in the Industry Equipment section. It was there last year, but seems to have disappeared. Was this intentional? I know there wasn't much action, but it was a good resource for repairs and issues. Thanks!
  13. 🔧 Truck & Equipment Repair
    Hi Guys, I don't post very often, (I do spend time reading the posts on the site this time of year though), but when I have something useful I always try to share it. I always have appreciated it when people take the time to post info that helps others out. I have a couple things to share about...
  14. SNO-PRO PLOW AND ACCESSORIES by Curtis
    do you have a manual for the sno-pro hitch n go 3000 need wiring guide for the switch toggle for jack, what i found online doesn't look like mine, serial 506097 maybe 2003
  15. 🔧 Truck & Equipment Repair
    I have a 8.5' Curtis I checked it out last week needed fluid so I added fluid went through all the movements to get pump up to speed for about 10 mins greased etc. etc. then parked it. Then about 3 days later went to use my truck so was going to remove the plow and it will not move at all! I...
  16. SNO-PRO PLOW AND ACCESSORIES by Curtis
    i recently did a fluid change on my sno pro 3000 and i replaced the angle lines and the lift for this year, but after i put everything back together, my hydraulic jack doesnt work because i believe it needs to be bled. the fluid in the line drained out as i did not replace this one cause i knew...
  17. SNO-PRO PLOW AND ACCESSORIES by Curtis
    This is the first Curtis plow ive ever owned, i bought a sno pro 3000 today for my dodge. when i bought my truck used it came with the plow frame and wiring for the curtis so i said heck ill just find one that will fit right on. i found that they made two different plug setups, my truck is...
  18. SNO-PRO PLOW AND ACCESSORIES by Curtis
    Anyone running a Home-Pro on a Wrangler? Saw an 8 year old plow that was on a 2002 Wrangler for sale locally. Can anyone tell me if the current 1FK41 mount that shows on the Curtis website for a 2012 Wrangler would match an 8 year old plow? How about truck side wiring? Any feedback would...
1-18 of 33 Results
Top