Snow Plowing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 89 Results
  1. Boss Plows Discussion
    Have a few problems going on. I have a 2002 Silverado 2500hd 8.1 Allison trans, boss rt3 straight blade. While plowing today, sometimes when I would hit a button on the controller while in drive or reverse, the power would surge and my truck would come to a hard stop. It stalled out a few times...
  2. Chevy Trucks
    I just picked up a 1999 Chevy Silverado 2500 with a Meyers C-7.5 mould-board, E-57 pump, what looks like an MDII mount setup with Nite-Sabre (not the Sabre II) plow lights, using 07347 light control modules (newer-style with accessible fuses). The plow mechanics and controller work like a dream...
  3. 🔧 Truck & Equipment Repair
    Ok so I was able to salvage an entire 1985 Fisher Speedcaster setup with a 7.5' blade, controls, engine mount pump, etc. It was on a 1985 K10 with the bolt on conventional truck side mount and I did not take it off of the K10 myself but did see it on it working. I own a 1998 GMC 1500 that I...
  4. 🔧 Truck & Equipment Repair
    Hello, I’m new to the forum. I had a look around and couldn’t find anything exactly same as my issue. I picked up a used plow, parts and pieces everywhere.Before I done anything I pressure tested the unit, went and held pressure C3 at 2500psi.Perfect. The solenoids wouldn’t operate...
  5. 🔧 Truck & Equipment Repair
    I recently purchased a Western Defender plow 2nd hand that came off a friends 2013 GMC half ton truck I installed it in my 2011 Chevy Silverado 1500. Having an issue getting the head lights to work right. When on low beams, the right low beam does not work, the left does. When switched to high...
  6. Used Plowing and Truck Equipment Forum
    Bedslide 1500Pro CG supports 1500lbs. Bought in 2014 and truck had a cap on it. Cost on Bedslide's website for a new one now is $1649. This one is in excellent condition. Came out of a 2005 GMC Sierra with the 6.5' bed. Dimensions are 75" long x 48" wide. I bought a new truck this doesn't fit...
  7. Used Plowing and Truck Equipment Forum
    Just bought a used plow and never had a plow on my truck before. Looking for the specific Western Ultramount 69981. Thanks.
  8. Chevy Trucks
    Hey all, I bought a 2020 3500HD (yes I know the majority of folks think it's ugly as sin.. But it's a work truck) and I'm in the process of building it out. It will have a wideout on the front and a 16 foot short iron plow on the back. Western 1.5 striker in bed and I'm also building a brine...
  9. Residential Snow Removal
    Is there any difference between these frames? I'd like to purchase a used plow for my 06 duramax but all I see are mounts for 2500HD - assuming gas powered. Thoughts?
  10. Chevy Trucks
    Here’s the deal. 2015 Silverado HD Drivers rear running light “reds” not functioning. But it works if you hit the key fab or touch the breaks. All fuses are good that I can find. Bulbs fine as the turn on but not in running light mode. Maybe a dual element bulb?. Odd but hopefully someone has...
  11. 🔧 Truck & Equipment Repair
    Looking through plow mags and seen this special model for snow plowing lol. My Nieghbor has had one for at least a year and I just figured he put the graphics on.. didn't know he was even a plow guy. Anyways thought it was interesting they were targeting niche groups.
  12. Boss Plows Discussion
    My Tundra was recently totalled. I have a Boss 7'6" standard duty & plow some but not a lot. Hoping to get another 1500 as I don't need a 2500 because I don't tow anything real heavy or load up the bed with heavy loads. Wanted a Ram but heard the warranty is voided if you put a plow on a 1500...
  13. Commercial Snow Removal
    Hello ALL, I am new to the industry, although I have plowed before this year I am finally opening my own LLC to plow. I am stuck between getting a 05' Chevy 2500HD 30,000 miles w/ a Western MPV plow (both truck undercarriage and chains on plow have a good amount rust) OR a 2002 Dodge 1500 ST...
  14. Used Plowing and Truck Equipment Forum
    F/S GM Fleet Flex Wiring Harness, 3 port ISO module truck side only no controller came off 04 Chevy 3500 New 3 years ago Sold Truck and buyer didnt want plow mounts or wiring! Call or text 563-212-3871 with reasonable offers buyer pays shipping and PayPal fees
  15. Used Plowing and Truck Equipment Forum
    F/S Western 99-10 2500/3500 mount Call or Text 563-212-3871 with reasonable offers Buyer pays shipping and paypal fees
  16. Equipment, Tools & Vehicle Pictures
    A few pics from yesterday..
  17. 🔧 Truck & Equipment Repair
    I have an 04 silverado 2500 (non HD), 4x4, 6.0L, auto trannt set up with a fisher minute mount. The tranny just started slipping and I dont want to use stop slip additive and risk completely loosing it during a storm. Im looking to get a rebuilt unit and put it in, but im not sure if exactly...
  18. Used Plowing and Truck Equipment Forum
    Selling my 2004 Ford F350 xl reg cab. 128k miles 5.4 triton motor with new exhaust manifolds New Cooper at3 tires Western 7'6" pro plow 3plug Truck is rusty, will new new bed as current one is rotted out. Tear in drives seat. Can text more pics. Truck is located in Holt,mi Asking $6,500obo I...
  19. Western Plows Discussion
    Hi there, Need some input and comments on the good ol western unimount. I have 3/4 chevys, a lifted Tundra, and a 2 door diesel yukon for plowing. For some reason I find I get about 15-16 inches of lift with the blade up full against the crossbar for the ULTRAMOUNT 8 ft pro.... this is with...
1-19 of 89 Results
Top