1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Xtreme V question

Discussion in 'Fisher Engineering Discussion' started by Pinzgauer, Feb 17, 2013.

  1. Pinzgauer

    Pinzgauer Senior Member
    from Vermont
    Messages: 134

    Hi -

    Is it normal for the bottom edges to wear off significantely more towards the middle or was that a bad install with regards to the geometry?

    Thanks ....
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    When you say middle, do you mean the hinge end of the edges? The answer is no.

    It is not setup properly. The XVs have plenty of height adjustment, more than enough to offset your taller tires. The adjustment procedure has been spelled out here in various posts, or just follow the directions in your owners manual. Also, make sure the truck is ready for plowing - most specifically the spreader is at least partially full, when you do th adjustment.
  3. Pinzgauer

    Pinzgauer Senior Member
    from Vermont
    Messages: 134

    Thank you very much for your help.