1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Xtreme V blade not staying up

Discussion in 'Fisher Engineering Discussion' started by farmboy52787, Mar 7, 2011.

  1. farmboy52787

    farmboy52787 Senior Member
    Messages: 114

    Hi I have an extreme V, when I lifted the blade all the way up, the blade would be back on the ground in less than 30 seconds and there were no leaks

    So I have replaced S3 Cartridge and the pump end relief valve and not when I lift it up, it sinks down about an 1, but thats all. Could this be the lift ram itself? Or is there another cartridge or relief valve that needs to be replaced? Thanks
     
  2. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,138

    S-2 valve,saw 3 this season
     
  3. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    yup, S2. Replaced mine and it fixed the same problem.
     
  4. andcon83

    andcon83 Senior Member
    Messages: 388

    It could be the piston. I had to replace a wing one because it wouldn't stay put. Luckily Fisher went good for it...2x
     
  5. cubanb343

    cubanb343 Senior Member
    from ERIE
    Messages: 637

    S2. I did mine too