1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

"Xtendor" Pictures???

Discussion in 'Commercial Snow Removal' started by EGLC, Dec 29, 2009.

  1. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    Does anyone have pictures of the "Extendor" plow guards mounted on plows??
     
  2. ProSeasons

    ProSeasons Senior Member
    Messages: 624

  3. SnowMatt13

    SnowMatt13 PlowSite.com Addict
    Messages: 1,533

    look down a few posts under the curb guard post
     
  4. EGLC

    EGLC PlowSite.com Addict
    Messages: 1,733

    Yah I did...no pictures of the "xtendor" series though
     
  5. NCat496

    NCat496 Senior Member
    Messages: 353

    That i posted are the extendor ones
     
  6. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    Can you elaborate some? the uneven edges of my plow kinda bug me. would like to stop it from happening.
     
  7. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    We run them on pretty much all our plows they work very well. Now our plows cutting edges wear out in the middle first.
     
  8. zlssefi

    zlssefi Senior Member
    Messages: 116

    Plowing at an airport means my guys are always using one side of the blade more than the other. From day one ive always double up the last 18 inches of the cutting edge on either side. I just hang the first edge, then cut the ends of the second and use longer grade eight carriage bolts to fasten them. Since ive done that I dont think ive changed edges on trucks in almost 3 years.
     
  9. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    do you run just their custom edge on each end, or their entire wearbar/edge?