1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

XLS Light Problem

Discussion in 'Fisher Engineering Discussion' started by FordFisherman, Sep 13, 2015.

  1. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Installed a used XLS on my truck along with the new battery and control harness. Using the existing lighting harness from my 3 plug set up. I have headlights and parking lights but no signal lights on the plow. The signal lights are working on the truck. Any ideas?
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    Are your turn signal wire "taps" on the truck still ok and not corroded?
     
  3. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    I will check, thanks. Purple and brown wires?
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    Purple and grey I thought. You could pull the parking lights out and double check
     
  5. NHresident

    NHresident Senior Member
    Messages: 285

    good chance the plow side light harness is bad (11 pin) before u go pulling things out trk side IF u or a buddy had a 3 plug plow that has know all working lights id hook ur trk up to it IF all works u know its the new to u plow side IF it don't the hunt is on trk side ie taps or 11 pin female plow light harness trk side
     
  6. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,531

    Really, guys in the NE really use them?

    Odd that both don't work.
     
  7. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Pass side had a broken wire, fixed and all good. Driver side still has me stumped. Removed and reconnected crimp on connector and still no signal light. Tried my other 3 plug plow and same issue so its truck side. Swapped bulbs, bulb is good. Anyone know which pin hole corresponds with driver side signal?
     
  8. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Plow Lighting Harness
    Solenoid Control Connectors
    MVP® Blade Control Connectors
    Control Side
    (end view)
    (pins)
    1
    2
    3
    5
    4
    6
    1
    4
    8
    12
    3
    7
    11
    14
    (Front View)
    1
    2
    3
    5
    4
    6
    Vehicle Side
    (end view)
    (sockets)
    MVP Blade to Straight Blade Adapter Kit PN 66760K
    Pin No. Solenoid Control Wire Color Only
    1 White
    2 Green
    3 Brown
    4 Black
    5 Blue
    6 Red
    Pin No. Wire Color Control Function
    1 Red/Yellow +12V
    2 Light Green Valve S2
    3 Orange/Black Ground
    4 Brown/Red Motor Relay
    5 Light Blue Valve S3
    6 White/Yellow Valve S1
    Pin No. Wire Color
    1 Light Blue w/Orange Stripe
    2 Blue w/Orange Stripe
    3 Black w/White Stripe
    4 Light Green
    5 Light Blue
    6 White w/Yellow Stripe
    7 Brown w/Red Stripe
    8 Red w/Yellow Stripe
    9 Orange w/Black Stripe
    10 Brown w/Green Stripe
    3-Pin
    Pin No. Wire Color Control Function
    1— —
    2— —
    3 Light Blue Valve S3
    4 Light Green Valve S2
    5— —
    6— —
    7— —
    8— —
    9 White/Yellow Valve S1
    10 — —
    11 — —
    7-Pin
    Pin No. Wire Color Control Function
    1 Black/White Valve S4
    2— —
    3 Light Blue Valve S2
    4 Light Green Valve S3
    5— —
    6 Red +12V
    7— —
    8 Blue/Orange Valve S5
    9 White/Yellow Valve S1
    10 Lt Blue/Orange Valve S6
    11 — —
    11-Pin
    Pin No. Wire Color Control Function
    1 Black/White PS Low Beam
    2 Black/Orange Ground
    3 White/Yellow PS High Beam
    4 White DS High Beam
    5 Blue/Orange PS Common
    6 Black DS Low Beam
    7 Black/Orange Ground
    8 Gray Left Directional
    9 Purple Right Directional
    10 Brown Parking Lights
    11 Light Blue DS Common
     
  9. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    First, get rid of that crimp connector, and either solder and heat shrink, or use heat shrink butt connectors
     
  10. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,972

    Here's the wiring diagram

    tmp_32452-Screenshot_2015-09-15-15-27-491940477337.jpg

    tmp_32452-Screenshot_2015-09-15-15-27-40-901559029.jpg
     
  11. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Thanks Dieselss. Bad crimp connector.