1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice
  1. Armorseal

    Armorseal Junior Member
    Messages: 1

    Just bought an '06 F-350 cc/sb. It has the fisher mounts- but no wiring/controller/plow. Anyone have what I need for sale, and not too far from N.E. Pa.? I'd prefer an 8.5 straight or v-plow. Thanks!

    Bill
     
  2. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 423

    I could get an 8.5 stainless xv for you but you'd have to make the trip to CT. As long as you avoid rush hour in metro area it's not bad. Pm me if interested
     
  3. Armorseal

    Armorseal Junior Member
    Messages: 1

    What part of Ct. are we talking, and price for what I need? I wouldn't mind driving to the Hartford area or closer, but prefer to stay away from the I-95 part of the state, especially the bottom part! I had my fill of that when I was driving truck, lol...
     
  4. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 423

    I have everything but plates, 4000 cash.

    I'm in eastern CT near norwich area. You could make it a trip to the casinos...
     
  5. FredG

    FredG 2000 Club Member
    Messages: 2,226

  6. Armorseal

    Armorseal Junior Member
    Messages: 1

    Thanks for the link, Fred. I'll keep a watch on that site. I can find plows for that price closer to me, Jfon. It would have to be a sweet deal to put up with that traffic and go the distance, lol...
     
  7. FredG

    FredG 2000 Club Member
    Messages: 2,226

    Got ya. Good luck
     
  8. paid4

    paid4 Junior Member
    Messages: 9

    Theres plenty on craigslist, now if they come with everything you need I doubt it, be easier to buy a blade then run to the dealer to get your harness and controller, that way its for your truck and not hacked up all to hell
     
  9. Armorseal

    Armorseal Junior Member
    Messages: 1

    Probably the way I'll wind up going, paid4. Just figured I'd exhaust all avenues....
     
  10. icedman

    icedman Junior Member
    Messages: 7

    I have a 4 port isolation module for sale if that is the route you end up going and need one. Works great, but I did not need it after upgrading to a newer truck.
     
  11. Armorseal

    Armorseal Junior Member
    Messages: 1

    Just the module?
     
  12. icedman

    icedman Junior Member
    Messages: 7

    Yes, unless you want the harness and mount for an 04 dodge 1500!
     
  13. EHoward19

    EHoward19 Junior Member
    from Boston
    Messages: 29

    Hey Bill I have a 8'6 Fisher SS XBlade 3 Plug. Could sell for $3500 with wiring and controller. 3 Plug Setup, PM me if interested. Maybe we can work something out.
    Thanks
     
  14. Armorseal

    Armorseal Junior Member
    Messages: 1

    Somebody's selling a complete snowdogg vx-85 for $2,000. For that price it might be worth taking the fisher mounts off and sell them, and just get the snowdogg?
     
  15. Armorseal

    Armorseal Junior Member
    Messages: 1

    EHoward, it won't let me pm you because of lack of posts, I assume.
     
  16. EHoward19

    EHoward19 Junior Member
    from Boston
    Messages: 29

    Give me a call 617 780 9318. I have only used fisher, but I heard Snow Dogg is junk.

     
  17. FredG

    FredG 2000 Club Member
    Messages: 2,226

    Wrong user
     
    Last edited: Feb 13, 2016
  18. FredG

    FredG 2000 Club Member
    Messages: 2,226

    Complete SS V blade, I think this is a fair deal. I can't see how you could get hurt with that. If it's okay with no known issues. Never owned a snowdogg but do know guys using them season after season. Fisher mounts should not be hard to sell.
     
  19. Armorseal

    Armorseal Junior Member
    Messages: 1

    EHoward, I'm thinking that's further than I'd like to travel. You'd also have to be somewhere in the 2's price range for me to put up with Ct. and Mass. (especially the Boston area) and depending which way I went, R.I. traffic too, lol...
     
  20. Lone136

    Lone136 Senior Member
    Messages: 108

    I just seen a fisher plow on Craigslist for 2000 for everything, but it;s a 7,5 You could get it and add wings to it and have the best of both worlds. It.s in Bloomsburg