1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

WTB Fisher concentional plow parts and lightbar in MA

Discussion in 'Used Plowing and Truck Equipment Forum' started by bgingras, Jan 2, 2009.

  1. bgingras

    bgingras Senior Member
    Messages: 282

    Bought a new truck and looking for a few things.

    Fisher belt driven pump - mine is ultra slow.
    8' cutting edge for Fisher speedcast plow.
    Full length (44" inches) light bar.

    If you have any of the above you want to move, feel free to fire off an email to:bgingras@earthlink.net

    We also have several parts available for sale or trade for any above as well:

    4 - 16" 8 lug dodge rims off a ram 2500
    1- 16" 8 lug dually rim.
     
  2. bad93blaster

    bad93blaster Member
    Messages: 62

    what do you want for the rims (dodge 3/4ton)
     
  3. bgingras

    bgingras Senior Member
    Messages: 282

    not sure, but not to much...make an offer...I'll have them available on Monday. They are from a 1998 Dodge Ram 2500.
     
  4. bad93blaster

    bad93blaster Member
    Messages: 62

    ill get you some numbers on the pump and cutting edge tomorrow
     
  5. bgingras

    bgingras Senior Member
    Messages: 282

    thanx, looking to get the truck setup before any weather hits :)
     
  6. Niteman9

    Niteman9 Senior Member
    Messages: 165

    First off my pump was really slow as well. I flushed all the oil out and took the valve apart and cleaned it and have not had a problem again. These are not real fast to start with.

    With that said I have a complete plow I will part out as I have not been able to sell the whole plow. It has an under hood electric pump which will work with you current control valve. The are in good condition look like they were hardly used.

    valve.jpg

    pump.jpg
     
  7. bgingras

    bgingras Senior Member
    Messages: 282

    how is the pump activated?
     
  8. bgingras

    bgingras Senior Member
    Messages: 282

    picked up a light bar, still looking for a pump and cutting edge. Anyone?
     
  9. mycirus

    mycirus Senior Member
    from Mass
    Messages: 589

  10. bgingras

    bgingras Senior Member
    Messages: 282

    thanks...I haven't looked at the truck enough to know if I'm going to make a custom box or use a stock one as of yet...my bigger concern is the pump, that and getting my passenger side front hub.bearing assembly installed.
     
  11. daninline

    daninline Senior Member
    Messages: 430

    Do you want to sell that pump? I want to remove the old motor driven pump?

    Thanks

    Dan