1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wiring the Turn Signals - green and blue

Discussion in 'Fisher Engineering Discussion' started by MatthewG, Jul 19, 2013.

  1. MatthewG

    MatthewG PlowSite.com Addict
    Messages: 1,390

    I do not have the wiring in front of me but:

    There is the blue side and the green side of the harness, which color goes to left and right?

    Also I believe there is only 1 green wire, but there is 2 blue wires (I could have that mixed up) - Is this correct?

    Thank you
  2. cet

    cet PlowSite Fanatic
    Messages: 7,196

    I can't recall the colors but when I installed my Western's there were 2 lose wires that were on the drivers side and 1 lose wire on the passenger side. On the passenger side that went to the signal and on the drivers side one was the running lights and the other the signal. I would guess that the same colors are the signals and the other the running lights.

    Could those blue wires be purple, I think those are the turn signals.
    Last edited: Jul 19, 2013
  3. Big Dog D

    Big Dog D PlowSite.com Addict
    Messages: 1,134