1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wiring Question

Discussion in 'Strobe Lighting' started by TL697, Apr 3, 2008.

  1. TL697

    TL697 Senior Member
    Messages: 189

    I bought this light:

    http://www.lshlights.us/AMAZING/itemMatrix.asp?CartId={A6E8013A-9EVERESTBA9-436C-9494-464D58096C35}&GroupCode=Guardian&eq=&MatrixType=1

    I would like to mount it just forward of my 3rd brake light. My question is: Can I splice the wires to my cargo light? Or would the added amp draw be too much for the factory wiring of the cargo light?

    Would be nice to not have the cigarette plug draped all over/in my cab... and be able to turn the light on w/ the factory cargo light switch...

    Thanks in advance,
     
  2. BlueLine Ent

    BlueLine Ent Senior Member
    Messages: 570

    No

    This light because it is a halogen rotator would be too much power. The LED version would have been ok.
     
  3. Pirsch

    Pirsch Senior Member
    Messages: 596

    You can track the wire in through the underside of the 3rd light lens but NO you would want to run a separate set of wires. Use not less than 16 guage wire and give it, it's own circuit.