1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wiring help for a 07' 2500HD

Discussion in 'Chevy Trucks' started by Mr Lay, Nov 30, 2011.

  1. Mr Lay

    Mr Lay Junior Member
    Messages: 17

    This is my first plow and i dont have a wiring harness. Does anyone have a diagram or any info to help me with wiring. Thanks!

    P.S. i have a 7.6 meyer straight plow.
     
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    Go to a dealer and buy the harnesses, thery can help you figure out what you have and what will work on your truck.

    what control do you have? What lights do you have? do you have pictures?
     
  3. Mr Lay

    Mr Lay Junior Member
    Messages: 17

    The plow is a Meyer Maxx 7.6 Poly. (I dont have a picture)

    The controller is the older square touch pad remote. Just has up, down, right, left. (I dont have a picture of the remote.)

    The lights are the older square lights. The ugly ones.

    Here is a pick of the lights...
    [​IMG]
     
    Last edited: Nov 30, 2011
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    I suggest Night Saber lights. the computer in your truck does not like you screwing with the harnesses. A control harness for that controller is not very expensive compared to the cost of all
     
  5. Mr Lay

    Mr Lay Junior Member
    Messages: 17

    Do you have an idea of what night sabers would cost and also how much th harness would cost for the controller?
     
  6. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

  7. Mr Lay

    Mr Lay Junior Member
    Messages: 17

    Thanks for your help I will look into the pricing.
     
  8. NICHOLS LANDSCA

    NICHOLS LANDSCA PlowSite Veteran
    Messages: 4,312

    07' Classic you are fine splicing in for run and turn 07' NBS you need relays not sure what you have just thought I'd throw that out there
     
  9. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    You need to diode the turn signals or the computer will have a fit.
     
  10. Mr Lay

    Mr Lay Junior Member
    Messages: 17

    Where is a good place to hook up the red fuse that is on the inside of the truck on the wiring harness?