1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wiring e-47

Discussion in 'Introduce Yourself to the Community' started by ejOlmstead LLC, Nov 10, 2009.

  1. ejOlmstead LLC

    ejOlmstead LLC Junior Member
    from Idaho
    Messages: 3

    I have a old meyer plow, that only go's up and down (no side to side). I had to put a new pump on and chose a e-47. Can I use the old toggle switch (up - down - neutral)?
    If so what coil (a,b, or c) would be used for just up and down.
    Thanks-
     
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    A and B

    You will need a new harness, and another switch to have it angle.

    If you want it to go just up and down using your existing switch you'll need to remove the PA block and bolt on a plate and gasket to make it an E-46
     
  3. ejOlmstead LLC

    ejOlmstead LLC Junior Member
    from Idaho
    Messages: 3

    SO if I want to put a raise lower switch in the cab and have no angle i have to convert the pump?
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    No you could make a harness to work it. You need to have the B coil and the motor running to raise the A coil activated to lower.