1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wing hoses

Discussion in 'Blizzard Plows Discussion' started by billet-boy, Dec 8, 2009.

  1. billet-boy

    billet-boy Member
    Messages: 97

    Looking for pictures of the hose routing on the older 810's that had 4 hoses per side. I had these at some point but cant find them now.
     
  2. fastjohnny

    fastjohnny Senior Member
    Messages: 654

    I think they are in the blizzard technical manuals available online. Basically you want to run them in a loop around the bracket wear the short and long cylinders are pinned in the slide box. From the outboard position, start on the bottom, wrap them over the top and back along the bottom, then out the molboard to the manifold.

    If you haven't pulled your old hoses yet, use a coupler to help feed the new hose in. You'll also need to atleast partially disassemble your wing/slide boxes as well to gain access, or be creative.