1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wing damage

Discussion in 'Blizzard Plows Discussion' started by sven1277, Jan 20, 2009.

  1. sven1277

    sven1277 Senior Member
    Messages: 480

    A wing on my 810ss will not retract fully. There is definately some metal bent or rolled funny back inside the slide box. I'm going to bring it back to the shop later today and wanted some insight on removing the wing. I haven't had any problems before. Thanks. The plow is an '05
     
  2. Rodd1

    Rodd1 Member
    Messages: 31

    I have the 2005 version that the wings would over extend my dealer fix it but that is what mine was doing when it happened
     
  3. damian

    damian Senior Member
    Messages: 330

    Remove both hose connections,pull hitch pin at center of plow, remove ram pin,remove both stop pins at back side of mould board,these are the 2 big pins held in by 5/16 nuts and bolts,grab wing and remove from slide box,should take less than 10 mins.