1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

wing chatter

Discussion in 'Boss Plows Discussion' started by chachi1984, Dec 1, 2013.

  1. chachi1984

    chachi1984 Senior Member
    Messages: 407

    I picked up a set of almost new wings. I installed the wings, and cut the rubber edge down so both edges line up. I put the rubber wing edge on so the steel plow edge is touching the ground .

    I started to go down the road a bit and they chatter a lot. do I just have the break them in more??? The rubber seems really hard. MY edges are smooth on the front and back. 1.5 inches thick , not the ones Ive seen with the slots on the back side.
     
  2. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Are they poly or rubber ???

    Poly edges will chatter worse then rubber
     
  3. gc3

    gc3 Senior Member
    Messages: 713

    They usually chatter until they're broken in and wore even with the plow edge
     
  4. chachi1984

    chachi1984 Senior Member
    Messages: 407

    they are the thick 1.5 poly edge
     
  5. SNO-PRO

    SNO-PRO Member
    Messages: 66

    Yes they chatter till they are wore in and then it will go away.
     
  6. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    change to rubber or just get use to it