1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Will push plates,etc. from 08 F350 fit 2011 f350

Discussion in 'Ford Trucks' started by capt caper, Aug 26, 2010.

  1. capt caper

    capt caper Senior Member
    Messages: 101

    I'm going from 08 f350 cc srw 6.4 to 11 f350 cc srw. And they want $1400 for new and close to 1K to reuse my old stuff. I took one off a 01 f350 and put in on a 02 f350. That was a little complex but I did it. I hear the new MM2's are easier on the 08's and up?
    Basically same truck for me just going from 08 to 11. I wonder if I should take off the fisher 8ft. HD gear and reinstall myself the new gear or the same gear
    . I see the numbers are the same except for the push plates. there is a -1 after that number for the 11.
     
  2. onsight

    onsight Senior Member
    Messages: 160

    Not sure on Fisher, but my Boss undercarriage from my 08 would not fit on my 11
     
  3. capt caper

    capt caper Senior Member
    Messages: 101

    Use to be able to call Fisher and find out this stuff. I'll try them. Thanks.
     
  4. Kavu

    Kavu Member
    Messages: 60

    They are different push plates if it's a Diesel. The part number is 7183-1.

    http://www.fisherplows.com/pdf/42157.00_030110.pdf
     
  5. capt caper

    capt caper Senior Member
    Messages: 101

  6. Kavu

    Kavu Member
    Messages: 60

    I'm not sure I understand your reply... My truck is a diesel too and the fisher part number above is what was installed on my truck last week.
     
  7. capt caper

    capt caper Senior Member
    Messages: 101

    Got it now. 08 is 7183 11 is 7183-1. I believe all the other stuff will work.