1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Will MM2 light harness work through the HID ballast?

Discussion in 'Fisher Engineering Discussion' started by Maleko, Nov 30, 2010.

  1. Maleko

    Maleko Senior Member
    from Ct
    Messages: 779

    Starting to wire my harness and i have the HID's in my truck. The plug end is the same as stock will the light harness work with these?

    thanks
     
  2. eric02038

    eric02038 Senior Member
    from MA
    Messages: 247

    use the factory harness if you still have it
     
  3. Maleko

    Maleko Senior Member
    from Ct
    Messages: 779

    Do you mean the factory light bulbs?
    the stock truck light harness is there and the HID's plug into them.

    The HID ballast just goes in between the factory harness end and the new HID bulbs.
     
  4. COLDZ71

    COLDZ71 Junior Member
    Messages: 1

    I just wired my truck up last weekend and it works fine. I have HIDs on all four lights.
     
  5. Maleko

    Maleko Senior Member
    from Ct
    Messages: 779

    Thanks. i got mine to work but i have no low beams on the plow side,???
     
  6. 06Sierra

    06Sierra PlowSite.com Addict
    from Maine
    Messages: 1,329

    Where the factory wires plug into the plow side wires, unplug and plug in backwards. If that works, take the plow side plug apart and switch the wires around.
     
  7. Maleko

    Maleko Senior Member
    from Ct
    Messages: 779

    Thanks , ill try that.