1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Will 97 F350 fisher m/m push plates fit a 96 F250?

Discussion in 'Commercial Snow Removal' started by oldmankent, Nov 30, 2001.

  1. oldmankent

    oldmankent PlowSite.com Addict
    Messages: 1,318

    that is the question. I'm going to guess no, but they do both have leaf springs. thanks for the replies, Nick.
     
  2. GeoffD

    GeoffD PlowSite.com Veteran
    Messages: 2,266

    I am 99% sure the answer is no.

    The F 350 plates require removing the shock absober mounts. The F 350 also sits higher.

    The F 250 plates do not require you to remove the shock absorer mounts and sits slower than the F 350.

    The plates would probable bolt on fine. However the mounts probably will not line up with the plow.

    Geoff