1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Where to route my control wires into the cab?.. Dodge

Discussion in 'Commercial Snow Removal' started by hoot, Oct 24, 2004.

  1. hoot

    hoot Senior Member
    from SE Pa.
    Messages: 156

    Need a little help. Anybody have a DOdge and found a place to run the control wires into the cab?

    Thanks
    Mike
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    If its the newest body style, the best place is to drill a hole through the plastic plug that is in the fire walls just to the right of the brakde booster. if its the body style before that, just use a knife and slice the boot that is in the same location.
     
  3. hoot

    hoot Senior Member
    from SE Pa.
    Messages: 156

    Thanks... you mean that long shaped plastic plate that looks to be held on with rivets? What is that for?

    Mike
     
  4. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Hoot,

    thats the place, its for the clutch slave/pedal pass through when you have a manual tranny.

    Usually, a 5/8ths hole is big enough (at least for western/fisher).
     
  5. hoot

    hoot Senior Member
    from SE Pa.
    Messages: 156

    Great... that's where I'' go. Probably holesaw as big as I can go cause there's always a need for a bigger hole....
    :eek: