1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Where to get salt deflector??

Discussion in 'Ice Management' started by cj7plowing, Feb 20, 2012.

  1. cj7plowing

    cj7plowing Senior Member
    Messages: 382

    looking for conveyor belt type material for the back of a truck to deflect salt from going underneath. Anyone know where I can buy 10ftx 24". are just some type of rubber material.
     
  2. Oshkosh

    Oshkosh PlowSite.com Addict
    Messages: 1,655

    I always had luck with the local sand pits/ material processors, they usually have old worn belts kicking around.
     
  3. USMCMP5811

    USMCMP5811 Senior Member
    Messages: 267

  4. tuney443

    tuney443 PlowSite.com Addict
    Messages: 1,847

    Like Oshkosh said, go to your local gravel bank/ rock quarry.
     
  5. CCL LLC

    CCL LLC Junior Member
    Messages: 28

    I have also seen guys using rubber mud flapps to deflect the sand and salt.
     
  6. siteworkplus

    siteworkplus Senior Member
    from mass
    Messages: 514

    I used an old mud flap from a 10whlr

    Also a tailgate piece from a poly p/u bed liner kit I had lying around
     
  7. White Gardens

    White Gardens 2000 Club Member
    Messages: 2,665

    I just used two old mudflaps for mine. Had to drill holes to fit my spreader lines through, but that was it.

    ....
     
  8. vinnys

    vinnys Senior Member
    Messages: 112

    Home Depot or Lowes. Get a rubber floor mat in the size you need. Cheap and quick. Conveyor belt is nice if you could find it.
     
  9. JTVLandscaping

    JTVLandscaping Senior Member
    Messages: 860

    A mudflap I found on the side of the road. Conveyer material is nice too...but that flap fell off.