1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Whelen ULF44 LED Flasher

Discussion in 'Strobe Lighting' started by sns250, Dec 27, 2015.

  1. sns250

    sns250 Member
    Messages: 87

    Looking for some install help.

    I have 4 6" Amber oval LED lights that are cut into my aluminum flat bed. I think I have decided to run them to the ULF44 Flasher.

    My question now is. I want to run them through my up fitter switches on my super duty. The install instructions are a little confusing. Do I just run the positive from the switch to the positive on the flasher then hook the 4 lights up to the 4 different channels?

    Thanks for the help, this is the first thing that I have hooked up that didn't have its own flasher.
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,973

    Pin 1 is your ground.
    Pin 6 is your switched power.
    Pin 5 is the sync....If you want your lights to flash in pattern.
    Pin 4 is your scan lock. Says to apply pos for less then one sec for next pattern
    Pin 3 changes to night mode....IMO leave that one alone. Looks like it applies low power for night.
    7,8,9,10. Your led power outs