1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Whelen Edge Flasher Board

Discussion in 'Strobe Lighting' started by mainecowboy, Dec 13, 2010.

  1. mainecowboy

    mainecowboy Junior Member
    from Maine
    Messages: 10

    Hi everyone,

    I have an extra Whelen Edge 68386B flasher board, like the one pictured here. I looked through the collection of manuals at Whelen's site and found this-- but it doesn't give me the info I need. Can anyone tell me what type of controller gets attached to the controller port?

    Thanks,

    Jason
     
  2. kitn1mcc

    kitn1mcc Senior Member
    Messages: 516

    looks like just voltage input from maybe the matrix it would work just be applying voltage to the input
     
  3. mainecowboy

    mainecowboy Junior Member
    from Maine
    Messages: 10

    I tried just applying 12v DC and it worked!

    Thanks!! Now just to mount it in the lightbar and run some wires!

    Jason
     
  4. Strobesnmore

    Strobesnmore Senior Member
    Messages: 413

    Thats a halogen board so you can only run halogens bulbs with it. Depending on the board the lights may flash or may not. Some only let one set of lights flash and one steady burn. Definitely and older board so hard to tell.