1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What type of mount?

Discussion in 'Meyer / Diamond Products Discussion' started by Kentuckydiesel, Dec 19, 2005.

  1. Kentuckydiesel

    Kentuckydiesel Senior Member
    Messages: 151

    What type of Meyer mount is 3'1" wide at the outsides of the plow a-frame where it mounts and uses two pins to connect it?

    Thanks, Phillip
     
  2. bnewell

    bnewell Banned
    from Ohio
    Messages: 91

    None that I have ever seen. Even the large Gledhill municipal type plows push points are only 30" center to center.

    Could it be home made/fabricated??

    Brian
     
  3. Kentuckydiesel

    Kentuckydiesel Senior Member
    Messages: 151

    Not home made, I'll double check with the guy. -Phillip
     
  4. Kentuckydiesel

    Kentuckydiesel Senior Member
    Messages: 151

    He remeasured, it's 24 7/8" outside measurement. Any idea???? Thanks, Phillip
     
  5. ta3834bbl

    ta3834bbl Senior Member
    Messages: 215

    Exactly where is it being measured at. Outside to outside?
    Center to center? Most Meyer A-frames are 23.5" where the truck hooks to the A-frame. Some are 28" . You also need to know how long the A-frame is from center pivot bolt where it attaches to the sector to the back where the truck connects to it. There is also a difference in sector size, ie, 11" or 15" from center pivot bolt to the arched loop that has the holes in it to pin the angle should you lose a hose or cylinder. Check the Meyer home page at the top of this page.