1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What Sno Way do I have

Discussion in 'Sno-Way Discussion' started by snowdays, Dec 21, 2008.

  1. snowdays

    snowdays Senior Member
    from Ohio
    Messages: 119

    Yesterday I just picked up a snoway setup. I have always been around Meyer equipment and have no idea about snoway. The serial # on the a-frame/power unit is 25D102003. It appears to be complete minus a truck side mount. The blade is also complete but appears someone used a thinner piece of Lexan to replace the face of the blade. There is no control with it either. I would like to try and test the power unit to see if all functions work before I go looking for a truck mount and controller. Is there a way to jumper wires to see if it will work? Also, is this even worth putting any time or $$ into. Thanks.
     
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Sure, just jumper the motor and it should default to raise.

    Here's the manual it will give you the wiring harness details for jumping the coils. Good luck I'm sure your Snoway is worth setting up and that once you use it you'll be a snoway guy from then on.

    Here is the parts manual

    http://www.snoway.com/service/Parts Manuals/97100204j.pdf

    The owner's manual 24/25

    http://www.snoway.com/service/Owner Manuals/97100200E.pdf

    the Fenner Repair manual

    http://www.snoway.com/service/Fenner Repair/97100036A.pdf
     
  3. snowdays

    snowdays Senior Member
    from Ohio
    Messages: 119

    How much can I expect to pay for the things I know it needs. The control box, replacement lexan blade and truck side mount for a '99 F150?
     
  4. festerw

    festerw Senior Member
    Messages: 986

    The lexan used isn't very thick, if you're thinking it should be as thick as the poly blades from other brands that is wrong.